@@ -6367,95 +6367,6 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
return status;
}
-/**
- * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
- * @cmnd: Pointer to scsi_cmnd data structure.
- *
- * This routine does target reset to all targets on @cmnd->device->host.
- * This emulates Parallel SCSI Bus Reset Semantics.
- *
- * Return code :
- * 0x2003 - Error
- * 0x2002 - Success
- **/
-static int
-lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
-{
- struct Scsi_Host *shost = cmnd->device->host;
- struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
- struct lpfc_nodelist *ndlp = NULL;
- struct lpfc_scsi_event_header scsi_event;
- int match;
- int ret = SUCCESS, status, i;
- u32 logit = LOG_FCP;
-
- scsi_event.event_type = FC_REG_SCSI_EVENT;
- scsi_event.subcategory = LPFC_EVENT_BUSRESET;
- scsi_event.lun = 0;
- memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
- memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
-
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
-
- status = fc_block_scsi_eh(cmnd);
- if (status != 0 && status != SUCCESS)
- return status;
-
- /*
- * Since the driver manages a single bus device, reset all
- * targets known to the driver. Should any target reset
- * fail, this routine returns failure to the midlayer.
- */
- for (i = 0; i < LPFC_MAX_TARGET; i++) {
- /* Search for mapped node by target ID */
- match = 0;
- spin_lock_irq(shost->host_lock);
- list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
-
- if (vport->phba->cfg_fcp2_no_tgt_reset &&
- (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE))
- continue;
- if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
- ndlp->nlp_sid == i &&
- ndlp->rport &&
- ndlp->nlp_type & NLP_FCP_TARGET) {
- match = 1;
- break;
- }
- }
- spin_unlock_irq(shost->host_lock);
- if (!match)
- continue;
-
- status = lpfc_send_taskmgmt(vport, cmnd,
- i, 0, FCP_TARGET_RESET);
-
- if (status != SUCCESS) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
- "0700 Bus Reset on target %d failed\n",
- i);
- ret = FAILED;
- }
- }
- /*
- * We have to clean up i/o as : they may be orphaned by the TMFs
- * above; or if any of the TMFs failed, they may be in an
- * indeterminate state.
- * We will report success if all the i/o aborts successfully.
- */
-
- status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
- if (status != SUCCESS)
- ret = FAILED;
- if (ret == FAILED)
- logit = LOG_TRACE_EVENT;
-
- lpfc_printf_vlog(vport, KERN_ERR, logit,
- "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
- return ret;
-}
-
/**
* lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt
* @cmnd: Pointer to scsi_cmnd data structure.
@@ -7035,7 +6946,6 @@ struct scsi_host_template lpfc_template_nvme = {
.eh_abort_handler = lpfc_no_handler,
.eh_device_reset_handler = lpfc_no_handler,
.eh_target_reset_handler = lpfc_no_handler,
- .eh_bus_reset_handler = lpfc_no_handler,
.eh_host_reset_handler = lpfc_no_handler,
.slave_alloc = lpfc_no_slave,
.slave_configure = lpfc_no_slave,
@@ -7060,7 +6970,6 @@ struct scsi_host_template lpfc_template = {
.eh_abort_handler = lpfc_abort_handler,
.eh_device_reset_handler = lpfc_device_reset_handler,
.eh_target_reset_handler = lpfc_target_reset_handler,
- .eh_bus_reset_handler = lpfc_bus_reset_handler,
.eh_host_reset_handler = lpfc_host_reset_handler,
.slave_alloc = lpfc_slave_alloc,
.slave_configure = lpfc_slave_configure,
lpfc_bus_reset_handler is really just a loop calling lpfc_target_reset_handler() over all targets, which is what the error handler will be doing anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: James Smart <james.smart@broadcom.com> --- drivers/scsi/lpfc/lpfc_scsi.c | 91 ----------------------------------- 1 file changed, 91 deletions(-)