diff mbox series

[v3,22/25] ARM: dts: qcom-pm8941: add interrupt controller properties

Message ID 20211008012524.481877-23-dmitry.baryshkov@linaro.org
State Accepted
Commit 9fb04774f3436f93075b80870fd94e2e68f8bf04
Headers show
Series [v3,01/25] dt-bindings: pinctrl: qcom,pmic-mpp: Convert qcom pmic mpp bindings to YAML | expand

Commit Message

Dmitry Baryshkov Oct. 8, 2021, 1:25 a.m. UTC
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

---
 arch/arm/boot/dts/qcom-pm8941.dtsi | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

-- 
2.30.2
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index cf8daa2fe144..da00b8f5eecd 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -80,14 +80,8 @@  pm8941_mpps: mpps@a000 {
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pm8941_mpps 0 0 8>;
-			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-				     <0 0xa1 0 IRQ_TYPE_NONE>,
-				     <0 0xa2 0 IRQ_TYPE_NONE>,
-				     <0 0xa3 0 IRQ_TYPE_NONE>,
-				     <0 0xa4 0 IRQ_TYPE_NONE>,
-				     <0 0xa5 0 IRQ_TYPE_NONE>,
-				     <0 0xa6 0 IRQ_TYPE_NONE>,
-				     <0 0xa7 0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pm8941_temp: temp-alarm@2400 {