diff mbox series

[4/4] drm/msm/dpu: drop INTF_EDP from interface type conditions

Message ID 20220222062246.242577-5-dmitry.baryshkov@linaro.org
State New
Headers show
Series drm/msm/dpu: clearly document INTF_DP vs INTF_EDP difference | expand

Commit Message

Dmitry Baryshkov Feb. 22, 2022, 6:22 a.m. UTC 
To remove possible confusion between (old) INTF_EDP and newer INTF_DP,
stop using INTF_EDP in DPU's code. Until the 8x74/8x84 SoCs are
supported by DPU driver, there is no point in using INTF_EDP.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 3 +--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c          | 2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 478a608ba7f2..e76d240f554d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -92,8 +92,7 @@  static void drm_mode_to_intf_timing_params(
 	}
 
 	/* for DP/EDP, Shift timings to align it to bottom right */
-	if ((phys_enc->hw_intf->cap->type == INTF_DP) ||
-		(phys_enc->hw_intf->cap->type == INTF_EDP)) {
+	if (phys_enc->hw_intf->cap->type == INTF_DP) {
 		timing->h_back_porch += timing->h_front_porch;
 		timing->h_front_porch = 0;
 		timing->v_back_porch += timing->v_front_porch;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 116e2b5b1a90..1548614c508b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -141,7 +141,7 @@  static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
 	hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
 	display_hctl = (hsync_end_x << 16) | hsync_start_x;
 
-	if (ctx->cap->type == INTF_EDP || ctx->cap->type == INTF_DP) {
+	if (ctx->cap->type == INTF_DP) {
 		active_h_start = hsync_start_x;
 		active_h_end = active_h_start + p->xres - 1;
 		active_v_start = display_v_start;