@@ -122,6 +122,16 @@ struct armada_37xx_pinctrl {
.funcs = {_func1, _func2} \
}
+#define PIN_GRP_GPIO_0(_name, _start, _nr) \
+ { \
+ .name = _name, \
+ .start_pin = _start, \
+ .npins = _nr, \
+ .reg_mask = 0, \
+ .val = {0}, \
+ .funcs = {"gpio"} \
+ }
+
#define PIN_GRP_GPIO(_name, _start, _nr, _mask, _func1) \
{ \
.name = _name, \
@@ -179,6 +189,7 @@ static struct armada_37xx_pin_group armada_37xx_nb_groups[] = {
"pwm", "led"),
PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"),
PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"),
+ PIN_GRP_GPIO_0("gpio1_5", 5, 1),
PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"),
PIN_GRP_GPIO("i2c1", 0, 2, BIT(10), "i2c"),
PIN_GRP_GPIO("spi_cs1", 17, 1, BIT(12), "spi"),
@@ -195,6 +206,7 @@ static struct armada_37xx_pin_group armada_37xx_nb_groups[] = {
static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {
PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
PIN_GRP_GPIO("usb2_drvvbus1", 1, 1, BIT(1), "drvbus"),
+ PIN_GRP_GPIO_0("gpio2_2", 2, 1),
PIN_GRP_GPIO("sdio_sb", 24, 6, BIT(2), "sdio"),
PIN_GRP_GPIO("rgmii", 6, 12, BIT(3), "mii"),
PIN_GRP_GPIO("smi", 18, 2, BIT(4), "smi"),
gpio1_5 and gpio2_2 are GPIO-only pins. Add them into MPP groups table so they are properly exported as valid pin numbers. Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx") Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)