| Message ID | 20230318121828.739424-5-bryan.odonoghue@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v4,01/18] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required | expand |
On 18/03/2023 13:18, Bryan O'Donoghue wrote: > port is required to instantiate a remote-endpoint which can receive > orientation-switch messages from a Type-C mux. > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > .../bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > index 52886cdb0e506..1c887e34b1223 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > @@ -65,6 +65,12 @@ properties: > description: Flag the port as possible handler of orientation switching > type: boolean > > + port: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + A port node to link the PHY to a TypeC controller for the purpose of > + handling altmode muxing and orientation switching. Please extend the example as well. Don't you have there two ports? USB and DP? Best regards, Krzysztof
On Sun, Mar 19, 2023 at 12:45:13PM +0100, Krzysztof Kozlowski wrote: > On 18/03/2023 13:18, Bryan O'Donoghue wrote: > > port is required to instantiate a remote-endpoint which can receive > > orientation-switch messages from a Type-C mux. > > > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > > --- > > .../bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > > index 52886cdb0e506..1c887e34b1223 100644 > > --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > > +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > > @@ -65,6 +65,12 @@ properties: > > description: Flag the port as possible handler of orientation switching > > type: boolean > > > > + port: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: > > + A port node to link the PHY to a TypeC controller for the purpose of > > + handling altmode muxing and orientation switching. > > Please extend the example as well. > > Don't you have there two ports? USB and DP? Or 3: USB, DP, and connector. Please make sure this all aligns with what Bjorn and I discussed recently. It was for glink specifically. Rob
On 21/03/2023 20:49, Rob Herring wrote: > On Sun, Mar 19, 2023 at 12:45:13PM +0100, Krzysztof Kozlowski wrote: >> On 18/03/2023 13:18, Bryan O'Donoghue wrote: >>> port is required to instantiate a remote-endpoint which can receive >>> orientation-switch messages from a Type-C mux. >>> >>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >>> --- >>> .../bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 6 ++++++ >>> 1 file changed, 6 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml >>> index 52886cdb0e506..1c887e34b1223 100644 >>> --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml >>> +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml >>> @@ -65,6 +65,12 @@ properties: >>> description: Flag the port as possible handler of orientation switching >>> type: boolean >>> >>> + port: >>> + $ref: /schemas/graph.yaml#/properties/port >>> + description: >>> + A port node to link the PHY to a TypeC controller for the purpose of >>> + handling altmode muxing and orientation switching. >> >> Please extend the example as well. >> >> Don't you have there two ports? USB and DP? > > Or 3: USB, DP, and connector. > > Please make sure this all aligns with what Bjorn and I discussed > recently. It was for glink specifically. > > Rob This is a PHY though, the DP, USB endpoints will go into the connector or into the typec node itself. --- bod
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml index 52886cdb0e506..1c887e34b1223 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml @@ -65,6 +65,12 @@ properties: description: Flag the port as possible handler of orientation switching type: boolean + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the PHY to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + resets: items: - description: reset of phy block.
port is required to instantiate a remote-endpoint which can receive orientation-switch messages from a Type-C mux. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- .../bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 6 ++++++ 1 file changed, 6 insertions(+)