@@ -2155,34 +2155,28 @@ usb_1_qmpphy: phy@88e9000 {
status = "disabled";
};
- usb_2_qmpphy: phy-wrapper@88eb000 {
+ usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8350-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x200>;
+ reg = <0 0x088eb000 0 0x2000>;
status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_EN>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref_clk_src",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
-
- usb_2_ssphy: phy@88ebe00 {
- reg = <0 0x088ebe00 0 0x200>,
- <0 0x088ec000 0 0x200>,
- <0 0x088eb200 0 0x1100>;
- #phy-cells = <0>;
- #clock-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
- };
};
dc_noc: interconnect@90c0000 {
@@ -2327,7 +2321,7 @@ usb_2_dwc3: usb@a800000 {
iommus = <&apps_smmu 0x20 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 32 +++++++++++----------------- 1 file changed, 13 insertions(+), 19 deletions(-)