@@ -7,6 +7,11 @@
#include "rk3588-pinctrl.dtsi"
/ {
+ pipe_phy1_grf: syscon@fd5c0000 {
+ compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfd5c0000 0x0 0x100>;
+ };
+
gmac0: ethernet@fe1b0000 {
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe1b0000 0x0 0x10000>;
@@ -55,4 +60,20 @@ gmac0_mtl_tx_setup: tx-queues-config {
queue1 {};
};
};
+
+ combphy1_ps: phy@fee10000 {
+ compatible = "rockchip,rk3588-naneng-combphy";
+ reg = <0x0 0xfee10000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
+ <&cru PCLK_PHP_ROOT>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+ status = "disabled";
+ };
};
@@ -944,6 +944,16 @@ php_grf: syscon@fd5b0000 {
reg = <0x0 0xfd5b0000 0x0 0x1000>;
};
+ pipe_phy0_grf: syscon@fd5bc000 {
+ compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfd5bc000 0x0 0x100>;
+ };
+
+ pipe_phy2_grf: syscon@fd5c4000 {
+ compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfd5c4000 0x0 0x100>;
+ };
+
ioc: syscon@fd5f0000 {
compatible = "rockchip,rk3588-ioc", "syscon";
reg = <0x0 0xfd5f0000 0x0 0x10000>;
@@ -2200,6 +2210,38 @@ dmac2: dma-controller@fed10000 {
#dma-cells = <1>;
};
+ combphy0_ps: phy@fee00000 {
+ compatible = "rockchip,rk3588-naneng-combphy";
+ reg = <0x0 0xfee00000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>,
+ <&cru PCLK_PHP_ROOT>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PIPE_PHY0>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+ status = "disabled";
+ };
+
+ combphy2_psu: phy@fee20000 {
+ compatible = "rockchip,rk3588-naneng-combphy";
+ reg = <0x0 0xfee20000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>,
+ <&cru PCLK_PHP_ROOT>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PIPE_PHY2>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy2_grf>;
+ status = "disabled";
+ };
+
system_sram2: sram@ff001000 {
compatible = "mmio-sram";
reg = <0x0 0xff001000 0x0 0xef000>;
Add all 3 combo PHYs that can be found in RK3588. They are used for SATA, PCIe or USB3. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- arch/arm64/boot/dts/rockchip/rk3588.dtsi | 21 ++++++++++++ arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 42 +++++++++++++++++++++++ 2 files changed, 63 insertions(+)