mbox series

[V5,00/11] Add PMIC DT files for sc7280

Message ID 1621937466-1502-1-git-send-email-skakit@codeaurora.org
Headers show
Series Add PMIC DT files for sc7280 | expand

Message

Satya Priya May 25, 2021, 10:10 a.m. UTC
This series depends on https://patchwork.kernel.org/project/linux-arm-msm/list/?series=478225
which adds therml-zones node.

Changes in V2:
 - As per Matthias comments:
   - I've Split the patch into per-PMIC patches and one sc7280 patch
   - Removed 2nd critical point, thermal-governer property
   - s/pm8325_tz/pm7325_temp_alarm and s/pm7325_temp_alarm/pm7325_thermal
   - Fixed few other minor errors.

 - As per Bjorn's comments, replaced '_' with '-' in node names and moved
   DT files inclusion to board dts.

Changes in V3:
  - As per Matthias comments, changed commit text, modified critical interrupt
    node name like <name>-crit for all pmics.
  - Moved pmk8350_vadc channel nodes to idp dts, as it is not guaranteed that
    a board with the pmk8350 will always have the other 3 PMICs

Changes in V4:
 - PMR735A and PM8350C PMICS are used in sm8350 SoC. Added thermal_zones label
   for thermal-zones node to avoid compilation error while using the phandle
   in pmic dt files.
 - As per Matthias comments:
  - Changed commit text for pmk8350 pmic patch
  - Moved the header files inclusion for the on die tempertures of PMICs from
    pmk8350 dt file to sc7280-idp dts
  - Changed commit text and made a dedicated patch to include pmic dt files
    for sc7280-idp
  - Made separate patches for on die temp channel nodes and for adding thermal-
    zones node in sc7280 SoC dtsi

satya priya (11):
  arm64: dts: qcom: sm8350: Add label for thermal-zones node
  arm64: dts: qcom: pm7325: Add pm7325 base dts file
  arm64: dts: qcom: pm8350c: Add temp-alarm support
  arm64: dts: qcom: pm8350c: Correct the GPIO node
  arm64: dts: qcom: pmr735a: Add temp-alarm support
  arm64: dts: qcom: pmr735a: Correct the GPIO node
  arm64: dts: qcom: pmk8350: Add peripherals for pmk8350
  arm64: dts: qcom: pmk8350: Correct the GPIO node
  arm64: dts: qcom: sc7280: Include PMIC DT files for sc7280-idp
  arm64: dts: qcom: sc7280: Add ADC channel nodes for PMIC temperatures
    to sc7280-idp
  mfd: qcom-spmi-pmic: Add support for four variants

 .../devicetree/bindings/mfd/qcom,spmi-pmic.txt     |  4 ++
 arch/arm64/boot/dts/qcom/pm7325.dtsi               | 53 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8350c.dtsi              | 32 ++++++++++++-
 arch/arm64/boot/dts/qcom/pmk8350.dtsi              | 51 ++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/pmr735a.dtsi              | 32 ++++++++++++-
 arch/arm64/boot/dts/qcom/sc7280-idp.dts            | 34 ++++++++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |  2 +-
 7 files changed, 204 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7325.dtsi