diff mbox series

[04/10] arm64: dts: qcom: msm8916: Add RPM power domains

Message ID 20200916104135.25085-5-stephan@gerhold.net
State Accepted
Commit 2709436ecf38d12b70c7bf4eed4ff65ba5f41f04
Headers show
Series Convert MSM8916 to use rpmpd/power domains | expand

Commit Message

Stephan Gerhold Sept. 16, 2020, 10:41 a.m. UTC
MSM8916 has two RPM power domains: VDDCX and VDDMX.
So far we have been managing them by voting for raw voltages through
the regulator subsystem, but it's better to manage them with corners
as actual power domains.

Add the device tree node for rpmpd so we can manage them as real
power domains instead of using the regulators.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 29 +++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index aaa21899f1a6..117804f94c35 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -289,6 +289,35 @@  rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-msm8916";
 					#clock-cells = <1>;
 				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8916-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
 			};
 		};
 	};