diff mbox series

[07/10] dt-bindings: remoteproc: qcom,wcnss: Deprecate regulators for PDs

Message ID 20200916104135.25085-8-stephan@gerhold.net
State Accepted
Commit 20a2269c1983aff7894f432b86434ef1738e6d52
Headers show
Series Convert MSM8916 to use rpmpd/power domains | expand

Commit Message

Stephan Gerhold Sept. 16, 2020, 10:41 a.m. UTC
So far we have been doing all proxy votes by voting for raw voltages/load
through the regulator interface. But actually VDDCX and VDDMX represent
power domains that should be preferably managed using corner votes
through the power domain interface.

Document that those should be specified as power domains for
qcom,pronto-v1/2-pil and deprecate using them through the regulator
interface.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../bindings/remoteproc/qcom,wcnss-pil.txt    | 20 +++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
index d420f84ddfb0..cc0b7fc1c29b 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -34,14 +34,25 @@  on the Qualcomm WCNSS core.
 	Definition: should be "wdog", "fatal", optionally followed by "ready",
 		    "handover", "stop-ack"
 
-- vddmx-supply:
-- vddcx-supply:
+- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
+- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
 - vddpx-supply:
 	Usage: required
 	Value type: <phandle>
 	Definition: reference to the regulators to be held on behalf of the
 		    booting of the WCNSS core
 
+- power-domains:
+	Usage: required (for qcom,pronto-v1/2-pil)
+	Value type: <phandle>
+	Definition: reference to the power domains to be held on behalf of the
+		    booting of the WCNSS core
+
+- power-domain-names:
+	Usage: required (for qcom,pronto-v1/2-pil)
+	Value type: <stringlist>
+	Definition: must be "cx", "mx"
+
 - qcom,smem-states:
 	Usage: optional
 	Value type: <prop-encoded-array>
@@ -111,8 +122,9 @@  pronto@fb204000 {
 			      <&wcnss_smp2p_slave 3 0>;
 	interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
-	vddmx-supply = <&pm8841_s1>;
-	vddcx-supply = <&pm8841_s2>;
+	power-domains = <&rpmpd MSM8974_VDDCX>, <&rpmpd MSM8974_VDDMX>;
+	power-domain-names = "cx", "mx";
+
 	vddpx-supply = <&pm8941_s3>;
 
 	qcom,smem-states = <&wcnss_smp2p_out 0>;