mbox series

[v3,0/3] Add device tree for Intel n6000

Message ID 20220506154116.365235-1-matthew.gerlach@linux.intel.com
Headers show
Series Add device tree for Intel n6000 | expand

Message

matthew.gerlach@linux.intel.com May 6, 2022, 3:41 p.m. UTC 
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

This patch set adds a device tree for the Hard Processor System (HPS)
on an Agilex based Intel n6000 board.

Patch 1 defines the device tree binding for the HPS Copy Engine IP
used to copy a bootable image from host memory to HPS DDR.

Patch 2 defines the binding for the Intel n6000 board itself.

Patch 3 adds the device tree for the n6000 board.

Changelog v2 -> v3:
  - remove unused label
  - move from misc to soc
  - remove 0x from #address-cells/#size-cells values
  - change hps_cp_eng@0 to dma-controller@0
  - remote inaccurate 'items:' tag
  - added Acked-by
  - add unit number to memory node
  - remove spi node with unaccepted compatible value

Changelog v1 -> v2:
  - add dt binding for copy enging
  - add dt binding for n6000 board
  - fix copy engine node name
  - fix compatible field for copy engine
  - remove redundant status field
  - add compatibility field for the board
  - fix SPDX
  - fix how osc1 clock frequency is set

Matthew Gerlach (3):
  dt-bindings: soc: add bindings for Intel HPS Copy Engine
  dt-bindings: intel: add binding for Intel n6000
  arm64: dts: intel: add device tree for n6000

 .../bindings/arm/intel,socfpga.yaml           |  1 +
 .../bindings/soc/intel,hps-copy-engine.yaml   | 51 ++++++++++++++
 arch/arm64/boot/dts/intel/Makefile            |  3 +-
 .../boot/dts/intel/socfpga_agilex_n6000.dts   | 66 +++++++++++++++++++
 4 files changed, 120 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/soc/intel,hps-copy-engine.yaml
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts