diff mbox series

[24/46] dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion

Message ID 20201031184854.745828-25-jic23@kernel.org
State New
Headers show
Series dt-bindings:iio: yet more txt to yam conversions | expand

Commit Message

Jonathan Cameron Oct. 31, 2020, 6:48 p.m. UTC
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Simple conversion.  I have pruned descriptions that did not add much useful
detail.  Note that the mount-matrix description will form part of a generic
IIO binding.  No need to repeat that in every driver that uses it.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
 .../bindings/iio/magnetometer/ak8974.txt      | 31 ----------
 .../iio/magnetometer/asahi-kasei,ak8974.yaml  | 57 +++++++++++++++++++
 2 files changed, 57 insertions(+), 31 deletions(-)

Comments

Linus Walleij Nov. 4, 2020, 2:47 p.m. UTC | #1
On Sat, Oct 31, 2020 at 7:52 PM Jonathan Cameron <jic23@kernel.org> wrote:

> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Simple conversion.  I have pruned descriptions that did not add much useful
> detail.  Note that the mount-matrix description will form part of a generic
> IIO binding.  No need to repeat that in every driver that uses it.

Writing the mount-matrix YAML binding is going to be interesting!

> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Jonathan Cameron Nov. 8, 2020, 3:55 p.m. UTC | #2
On Wed, 4 Nov 2020 15:47:56 +0100
Linus Walleij <linus.walleij@linaro.org> wrote:

> On Sat, Oct 31, 2020 at 7:52 PM Jonathan Cameron <jic23@kernel.org> wrote:

> 

> > From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> >

> > Simple conversion.  I have pruned descriptions that did not add much useful

> > detail.  Note that the mount-matrix description will form part of a generic

> > IIO binding.  No need to repeat that in every driver that uses it.  

> 

> Writing the mount-matrix YAML binding is going to be interesting!


Would be amusing to try and fully constrain it to a valid rotation matrix
but for now it's a 9 element string-array.

I'm planning to move the huge amount of documentation to the main docs rather than
bury it in the dt-schema repo.  I'll probably add some cross references
so people have some hope of tracking down that doc.

Jonathan

> 

> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> > Cc: Linus Walleij <linus.walleij@linaro.org>  

> 

> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

> 

> Yours,

> Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
deleted file mode 100644
index 7f06eff3b504..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
+++ /dev/null
@@ -1,31 +0,0 @@ 
-* Asahi Kasei AK8974 magnetometer sensor
-
-Required properties:
-
-- compatible:
-    * "asahi-kasei,ak8974"
-    * "alps,hscdtd008a"
-- reg : the I2C address of the magnetometer
-
-Optional properties:
-
-- avdd-supply: regulator supply for the analog voltage
-  (see regulator/regulator.txt)
-- dvdd-supply: regulator supply for the digital voltage
-  (see regulator/regulator.txt)
-- interrupts: data ready (DRDY) and interrupt (INT1) lines
-  from the chip, the DRDY interrupt must be placed first.
-  The interrupts can be triggered on rising or falling
-  edges alike.
-- mount-matrix: an optional 3x3 mounting rotation matrix
-
-Example:
-
-ak8974@f {
-	compatible = "asahi-kasei,ak8974";
-	reg = <0x0f>;
-	avdd-supply = <&foo_reg>;
-	dvdd-supply = <&bar_reg>;
-	interrupts = <0 IRQ_TYPE_EDGE_RISING>,
-		     <1 IRQ_TYPE_EDGE_RISING>;
-};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
new file mode 100644
index 000000000000..cefb70def188
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
@@ -0,0 +1,57 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asahi Kasei AK8974 magnetometer sensor
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - alps,hscdtd008a
+      - asahi-kasei,ak8974
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Data ready (DRDY) and interrupt (INT1) lines from the chip. The DRDY
+      interrupt must be placed first. The interrupts can be triggered on
+      rising or falling edges.
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  mount-matrix: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@f {
+            compatible = "asahi-kasei,ak8974";
+            reg = <0x0f>;
+            avdd-supply = <&foo_reg>;
+            dvdd-supply = <&bar_reg>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>,
+                         <1 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...