diff mbox series

[08/13] microblaze/PCI: Remove unused PCI Indirect ops

Message ID 20221025065214.4663-9-thippeswamy.havalige@amd.com
State Accepted
Commit d4a37561c8894a59a8546256425a757a27b01b3a
Headers show
Series Remove unused microblaze PCIe bus architecture | expand

Commit Message

Havalige, Thippeswamy Oct. 25, 2022, 6:52 a.m. UTC
Remove unused variants of PCI indirect handling.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
---
 arch/microblaze/include/asm/pci-bridge.h |  34 -------
 arch/microblaze/pci/Makefile             |   2 +-
 arch/microblaze/pci/indirect_pci.c       | 158 -------------------------------
 arch/microblaze/pci/xilinx_pci.c         |   6 --
 4 files changed, 1 insertion(+), 199 deletions(-)
 delete mode 100644 arch/microblaze/pci/indirect_pci.c
diff mbox series

Patch

diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 170369d..cd9ae71 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -32,8 +32,6 @@  struct pci_controller {
 	int first_busno;
 	int last_busno;
 
-	int self_busno;
-
 	void __iomem *io_base_virt;
 	resource_size_t io_base_phys;
 
@@ -42,34 +40,6 @@  struct pci_controller {
 	 */
 	resource_size_t pci_mem_offset;
 
-	struct pci_ops *ops;
-	unsigned int __iomem *cfg_addr;
-	void __iomem *cfg_data;
-
-	/*
-	 * Used for variants of PCI indirect handling and possible quirks:
-	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
-	 *  EXT_REG - provides access to PCI-e extended registers
-	 *  SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
-	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
-	 *   to determine which bus number to match on when generating type0
-	 *   config cycles
-	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
-	 *   hanging if we don't have link and try to do config cycles to
-	 *   anything but the PHB.  Only allow talking to the PHB if this is
-	 *   set.
-	 *  BIG_ENDIAN - cfg_addr is a big endian register
-	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
-	 *   on the PLB4.  Effectively disable MRM commands by setting this.
-	 */
-#define INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
-#define INDIRECT_TYPE_EXT_REG		0x00000002
-#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
-#define INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
-#define INDIRECT_TYPE_BIG_ENDIAN		0x00000010
-#define INDIRECT_TYPE_BROKEN_MRM		0x00000020
-	u32 indirect_type;
-
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
 	 * ranges since the common pci_bus structure can't handle more
 	 */
@@ -91,9 +61,5 @@  static inline int isa_vaddr_is_ioport(void __iomem *address)
 }
 #endif /* CONFIG_PCI */
 
-extern void setup_indirect_pci(struct pci_controller *hose,
-			       resource_size_t cfg_addr,
-			       resource_size_t cfg_data, u32 flags);
-
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile
index 0251c20..3cbdf25 100644
--- a/arch/microblaze/pci/Makefile
+++ b/arch/microblaze/pci/Makefile
@@ -3,5 +3,5 @@ 
 # Makefile
 #
 
-obj-$(CONFIG_PCI)		+= pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI)		+= pci-common.o iomap.o
 obj-$(CONFIG_PCI_XILINX)	+= xilinx_pci.o
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
deleted file mode 100644
index 1caf7d3..0000000
--- a/arch/microblaze/pci/indirect_pci.c
+++ /dev/null
@@ -1,158 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <linux/io.h>
-#include <asm/pci-bridge.h>
-
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-	u32 bus_no, reg;
-
-	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
-		if (bus->number != hose->first_busno)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number;
-
-	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
-		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
-	else
-		reg = offset & 0xfc; /* Only 3 bits for function */
-
-	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
-		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-	else
-		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-	u32 bus_no, reg;
-
-	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
-		if (bus->number != hose->first_busno)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	bus_no = (bus->number == hose->first_busno) ?
-			hose->self_busno : bus->number;
-
-	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
-		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
-	else
-		reg = offset & 0xfc;
-
-	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
-		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-	else
-		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
-			 (devfn << 8) | reg | cfg_type));
-
-	/* suppress setting of PCI_PRIMARY_BUS */
-	if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
-		if ((offset == PCI_PRIMARY_BUS) &&
-			(bus->number == hose->first_busno))
-			val &= 0xffffff00;
-
-	/* Workaround for PCI_28 Errata in 440EPx/GRx */
-	if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
-			offset == PCI_CACHE_LINE_SIZE) {
-		val = 0;
-	}
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops = {
-	.read = indirect_read_config,
-	.write = indirect_write_config,
-};
-
-void __init
-setup_indirect_pci(struct pci_controller *hose,
-		   resource_size_t cfg_addr,
-		   resource_size_t cfg_data, u32 flags)
-{
-	resource_size_t base = cfg_addr & PAGE_MASK;
-	void __iomem *mbase;
-
-	mbase = ioremap(base, PAGE_SIZE);
-	hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
-	if ((cfg_data & PAGE_MASK) != base)
-		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-	hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
-	hose->ops = &indirect_pci_ops;
-	hose->indirect_type = flags;
-}
diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c
index 3fa16e3..5dc4182 100644
--- a/arch/microblaze/pci/xilinx_pci.c
+++ b/arch/microblaze/pci/xilinx_pci.c
@@ -83,7 +83,6 @@  static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
  */
 void __init xilinx_pci_init(void)
 {
-	struct pci_controller *hose;
 	struct resource r;
 	void __iomem *pci_reg;
 	struct device_node *pci_node;
@@ -97,11 +96,6 @@  void __init xilinx_pci_init(void)
 		return;
 	}
 
-	/* Setup config space */
-	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
-			   r.start + XPLB_PCI_DATA,
-			   INDIRECT_TYPE_SET_CFG_TYPE);
-
 	/* Set the max bus number to 255, and bus/subbus no's to 0 */
 	pci_reg = of_iomap(pci_node, 0);
 	WARN_ON(!pci_reg);