| Message ID | 20231004161038.2818327-10-gregory.clement@bootlin.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for the Mobileye EyeQ5 SoC | expand |
"Arnd Bergmann" <arnd@arndb.de> writes: > On Wed, Oct 4, 2023, at 18:10, Gregory CLEMENT wrote: >> + >> + chosen { >> + bootargs = "cca=5 earlycon console=ttyAMA2 ddr32_alias=0x40000000"; >> + stdout-path = "serial2:115200n8"; >> + }; >> + > > The bootargs should not be needed here, at least most of them: > > - no need to set both console= and the stdout-path if you have > earlycon support OK I keep stdout-path. > > - ddr32_alias=0x40000000 sounds like something that should be > part of the dtb elsewhere and not require a command line argument. > I assume this is needed to even build? I will answer on the other email but in short I agree. > > - For cca=, it looks like this is intended to be autodetected from > the c0_config register. Does that not work for you for some reason? Indeed I checked and it it nost needed anymore, it is already set in cps_smp_setup. I remove it. Thanks, Gregory > > Arnd
diff --git a/arch/mips/boot/dts/mobileye/Makefile b/arch/mips/boot/dts/mobileye/Makefile index 99c4124fd4c0..539b2e1f4e07 100644 --- a/arch/mips/boot/dts/mobileye/Makefile +++ b/arch/mips/boot/dts/mobileye/Makefile @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only # Copyright 2023 Mobileye Vision Technologies Ltd. +dtb-$(CONFIG_SOC_EYEQ5) += eyeq5-epm5.dtb + obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts new file mode 100644 index 000000000000..ca03115a2858 --- /dev/null +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Copyright 2023 Mobileye Vision Technologies Ltd. + */ + +/dts-v1/; + +#include "eyeq5.dtsi" + +/ { + compatible = "mobileye,eyeq5-epm5", "mobileye,eyeq5"; + model = "Mobile EyeQ5 MP5 Evaluation board"; + + chosen { + bootargs = "cca=5 earlycon console=ttyAMA2 ddr32_alias=0x40000000"; + stdout-path = "serial2:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x8 0x00000000 0x0 0x80000000>; + }; +}; +
Add a device tree for the Mobileye EPM5 evaluation board. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- arch/mips/boot/dts/mobileye/Makefile | 2 ++ arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 24 ++++++++++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts