diff mbox series

[10/11] can: lin: Support setting LIN mode

Message ID 20240422065114.3185505-11-christoph.fritz@hexdev.de
State Superseded
Headers show
Series LIN Bus support for Linux | expand

Commit Message

Christoph Fritz April 22, 2024, 6:51 a.m. UTC
A LIN node can work as commander or responder. This patch is introducing
a new control mode (CAN_CTRLMODE_LIN_COMMANDER), so that e.g. the ip
tool from iproute2 can turn on commander mode when the device is being
brought up.

Signed-off-by: Christoph Fritz <christoph.fritz@hexdev.de>
---
 drivers/net/can/lin.c            | 40 +++++++++++++++++++++++++++++++-
 include/net/lin.h                |  7 ++++++
 include/uapi/linux/can/netlink.h |  1 +
 3 files changed, 47 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/can/lin.c b/drivers/net/can/lin.c
index 56492952c8588..472cadc87ad86 100644
--- a/drivers/net/can/lin.c
+++ b/drivers/net/can/lin.c
@@ -254,11 +254,40 @@  static netdev_tx_t lin_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 }
 
+static int lin_update_mode(struct net_device *ndev)
+{
+	struct lin_device *ldev = netdev_priv(ndev);
+	u32 ctrlmode = ldev->can.ctrlmode;
+	enum lin_mode lm;
+	int ret = 0;
+
+	lm = (ctrlmode & CAN_CTRLMODE_LIN_COMMANDER) ? LINBUS_COMMANDER :
+						       LINBUS_RESPONDER;
+	if (ldev->lmode != lm) {
+		if (!ldev->ldev_ops->update_lin_mode) {
+			netdev_err(ndev, "setting lin mode unsupported\n");
+			return -EINVAL;
+		}
+		ret = ldev->ldev_ops->update_lin_mode(ldev, lm);
+		if (ret) {
+			netdev_err(ndev, "Failed to set lin mode: %d\n", ret);
+			return ret;
+		}
+		ldev->lmode = lm;
+	}
+
+	return ret;
+}
+
 static int lin_open(struct net_device *ndev)
 {
 	struct lin_device *ldev = netdev_priv(ndev);
 	int ret;
 
+	ret = lin_update_mode(ndev);
+	if (ret)
+		return ret;
+
 	ldev->tx_busy = false;
 
 	ret = open_candev(ndev);
@@ -437,7 +466,7 @@  struct lin_device *register_lin(struct device *dev,
 	ndev->mtu = CANFD_MTU;
 	ldev->can.bittiming.bitrate = LIN_DEFAULT_BAUDRATE;
 	ldev->can.ctrlmode = CAN_CTRLMODE_LIN;
-	ldev->can.ctrlmode_supported = 0;
+	ldev->can.ctrlmode_supported = CAN_CTRLMODE_LIN_COMMANDER;
 	ldev->can.bitrate_const = lin_bitrate;
 	ldev->can.bitrate_const_cnt = ARRAY_SIZE(lin_bitrate);
 	ldev->can.do_set_bittiming = lin_set_bittiming;
@@ -452,6 +481,15 @@  struct lin_device *register_lin(struct device *dev,
 		goto exit_candev;
 	}
 
+	ldev->lmode = LINBUS_RESPONDER;
+	if (ldev->ldev_ops->update_lin_mode) {
+		ret = ldev->ldev_ops->update_lin_mode(ldev, ldev->lmode);
+		if (ret) {
+			netdev_err(ndev, "updating lin mode failed\n");
+			goto exit_candev;
+		}
+	}
+
 	ret = register_candev(ndev);
 	if (ret)
 		goto exit_candev;
diff --git a/include/net/lin.h b/include/net/lin.h
index 3f78cfda9c657..4f064a2ce2ca8 100644
--- a/include/net/lin.h
+++ b/include/net/lin.h
@@ -44,6 +44,11 @@  struct lin_attr {
 	struct lin_device *ldev;
 };
 
+enum lin_mode {
+	LINBUS_RESPONDER = 0,
+	LINBUS_COMMANDER,
+};
+
 struct lin_device {
 	struct can_priv can;  /* must be the first member */
 	struct net_device *ndev;
@@ -55,6 +60,7 @@  struct lin_device {
 	struct sk_buff *tx_skb;
 	struct kobject *lin_ids_kobj;
 	struct lin_attr sysfs_entries[LIN_NUM_IDS];
+	enum lin_mode lmode;
 };
 
 enum lin_checksum_mode {
@@ -79,6 +85,7 @@  struct lin_responder_answer {
 
 struct lin_device_ops {
 	int (*ldo_tx)(struct lin_device *ldev, const struct lin_frame *frame);
+	int (*update_lin_mode)(struct lin_device *ldev, enum lin_mode lm);
 	int (*update_bitrate)(struct lin_device *ldev, u16 bitrate);
 	int (*update_responder_answer)(struct lin_device *ldev,
 				       const struct lin_responder_answer *answ);
diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h
index 51b0e2a7624e4..6c84a7666c646 100644
--- a/include/uapi/linux/can/netlink.h
+++ b/include/uapi/linux/can/netlink.h
@@ -104,6 +104,7 @@  struct can_ctrlmode {
 #define CAN_CTRLMODE_TDC_AUTO		0x200	/* CAN transiver automatically calculates TDCV */
 #define CAN_CTRLMODE_TDC_MANUAL		0x400	/* TDCV is manually set up by user */
 #define CAN_CTRLMODE_LIN		0x800	/* LIN bus mode */
+#define CAN_CTRLMODE_LIN_COMMANDER	0x1000	/* LIN bus specific commander mode */
 
 /*
  * CAN device statistics