diff mbox series

[v3,2/7] regulator: dt-bindings: Document max8997-pmic nodes

Message ID 20201222070520.710096-2-timon.baetz@protonmail.com
State Superseded
Headers show
Series [v3,1/7] extcon: max8997: Add CHGINS and CHGRM interrupt handling | expand

Commit Message

Timon Baetz Dec. 22, 2020, 7:31 a.m. UTC
Add maxim,max8997-battery and maxim,max8997-muic optional nodes.

Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
---
 .../bindings/regulator/max8997-regulator.txt          | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Krzysztof Kozlowski Dec. 22, 2020, 8:37 a.m. UTC | #1
On Tue, Dec 22, 2020 at 07:31:21AM +0000, Timon Baetz wrote:
> Add maxim,max8997-battery and maxim,max8997-muic optional nodes.
> 
> Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
> ---
>  .../bindings/regulator/max8997-regulator.txt          | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 6fe825b8ac1b..f969fc09fe29 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -53,6 +53,17 @@  Additional properties required if either of the optional properties are used:
 - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
   for dvs. The format of the gpio specifier depends in the gpio controller.
 
+Optional nodes:
+- charger: Node for configuring the charger driver.
+  Required properties:
+  - compatible: "maxim,max8997-battery"
+  - extcon: extcon specifier for charging events
+  - charger-supply: regulator node for charging current
+
+- muic: Node used only by extcon consumers.
+  Required properties:
+  - compatible: "maxim,max8997-muic"
+
 Regulators: The regulators of max8997 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
 sub-node should be of the format as listed below.