@@ -178,11 +178,6 @@
#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
#define MXSER_ISR_PASS_LIMIT 100
-/*CheckIsMoxaMust return value*/
-#define MOXA_OTHER_UART 0x00
-#define MOXA_MUST_MU150_HWID 0x01
-#define MOXA_MUST_MU860_HWID 0x02
-
#define WAKEUP_CHARS 256
#define UART_MCR_AFE 0x20
@@ -199,6 +194,12 @@
#define MXSER_HIGHBAUD 1
+enum mxser_must_hwid {
+ MOXA_OTHER_UART = 0x00,
+ MOXA_MUST_MU150_HWID = 0x01,
+ MOXA_MUST_MU860_HWID = 0x02,
+};
+
static const struct {
u8 type;
u8 fifo_size;
@@ -370,7 +371,7 @@ struct mxser_board {
unsigned long vector;
unsigned long vector_mask;
- int must_hwid;
+ enum mxser_must_hwid must_hwid;
int uart_type;
struct mxser_port ports[MXSER_PORTS_PER_BOARD];
@@ -583,7 +584,7 @@ static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
outb(oldlcr, baseio + UART_LCR);
}
-static int mxser_must_get_hwid(unsigned long io)
+static enum mxser_must_hwid mxser_must_get_hwid(unsigned long io)
{
u8 oldmcr, hwid;
int i;
@@ -599,10 +600,10 @@ static int mxser_must_get_hwid(unsigned long io)
}
mxser_get_must_hardware_id(io, &hwid);
- for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
+ for (i = 1; i < UART_INFO_NUM; i++) /* 0 = OTHER_UART */
if (hwid == Gpci_uart_info[i].type)
- return (int)hwid;
- }
+ return hwid;
+
return MOXA_OTHER_UART;
}
Provided the MUST HW ID is an enumeration, define one (enum mxser_must_hwid) and use it in the code. Signed-off-by: Jiri Slaby <jslaby@suse.cz> --- drivers/tty/mxser.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)