mbox series

[0/5] usb: dwc3: qcom: Allow runtime PM

Message ID 20230325165217.31069-1-manivannan.sadhasivam@linaro.org
Headers show
Series usb: dwc3: qcom: Allow runtime PM | expand

Message

Manivannan Sadhasivam March 25, 2023, 4:52 p.m. UTC
Hi,

This series allows the dwc3-qcom driver to do runtime PM itself without
userspace intervention. Still, userspace is required to enable runtime PM
for dwc3 glue and xhci drivers as we cannot enable runtime PM for them.
But this series avoids one more additional step.

While enabling runtime PM, I noticed that the xhci driver suspends before
catching the xhci interrupts during resume. This ended up deferring the
device enumeration for some time. So I included a patch adding autosuspend
delay of 200ms to the xhci driver. With this delay, usb enumeration happens
properly.

This series has been tested on SC8280XP-CRD and RB5 devices.

Thanks,
Mani

Manivannan Sadhasivam (5):
  arm64: dts: qcom: sc8280xp: Add missing dwc3 quirks
  xhci: host: Use 200ms autosuspend delay for runtime suspend
  usb: dwc3: qcom: Fix null ptr access during runtime_suspend()
  usb: dwc3: qcom: Clear pending interrupt before enabling wake
    interrupt
  usb: dwc3: qcom: Allow runtime PM

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++++++++++++
 drivers/usb/dwc3/dwc3-qcom.c           | 13 +++++++++----
 drivers/usb/host/xhci-plat.c           |  2 ++
 3 files changed, 25 insertions(+), 4 deletions(-)

Comments

Konrad Dybcio March 27, 2023, 9:01 a.m. UTC | #1
On 25.03.2023 17:52, Manivannan Sadhasivam wrote:
> Hi,
> 
> This series allows the dwc3-qcom driver to do runtime PM itself without
> userspace intervention. Still, userspace is required to enable runtime PM
> for dwc3 glue and xhci drivers as we cannot enable runtime PM for them.
> But this series avoids one more additional step.
What sort of 'userspace intervention' are we talking about?
echo mem > /sys/power/state?

Konrad
> 
> While enabling runtime PM, I noticed that the xhci driver suspends before
> catching the xhci interrupts during resume. This ended up deferring the
> device enumeration for some time. So I included a patch adding autosuspend
> delay of 200ms to the xhci driver. With this delay, usb enumeration happens
> properly.
> 
> This series has been tested on SC8280XP-CRD and RB5 devices.
> 
> Thanks,
> Mani
> 
> Manivannan Sadhasivam (5):
>   arm64: dts: qcom: sc8280xp: Add missing dwc3 quirks
>   xhci: host: Use 200ms autosuspend delay for runtime suspend
>   usb: dwc3: qcom: Fix null ptr access during runtime_suspend()
>   usb: dwc3: qcom: Clear pending interrupt before enabling wake
>     interrupt
>   usb: dwc3: qcom: Allow runtime PM
> 
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++++++++++++
>  drivers/usb/dwc3/dwc3-qcom.c           | 13 +++++++++----
>  drivers/usb/host/xhci-plat.c           |  2 ++
>  3 files changed, 25 insertions(+), 4 deletions(-)
>
Manivannan Sadhasivam March 27, 2023, 9:17 a.m. UTC | #2
On Mon, Mar 27, 2023 at 11:01:35AM +0200, Konrad Dybcio wrote:
> 
> 
> On 25.03.2023 17:52, Manivannan Sadhasivam wrote:
> > Hi,
> > 
> > This series allows the dwc3-qcom driver to do runtime PM itself without
> > userspace intervention. Still, userspace is required to enable runtime PM
> > for dwc3 glue and xhci drivers as we cannot enable runtime PM for them.
> > But this series avoids one more additional step.
> What sort of 'userspace intervention' are we talking about?
> echo mem > /sys/power/state?
> 

I forgot to add that bit:

echo auto > /sys/devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.1.auto/power/control
echo auto > /sys/devices/platform/soc@0/a8f8800.usb/a800000.usb/power/control

You need to set "auto" for the runtime control for both xhci and dwc drivers.

Then if you don't connect a usb device, all 3 drivers (dwc3-qcom, dwc3, and
xhci) will become runtime suspended after a delay of 5s (default delay).

This can be confirmed by:

cat /sys/devices/platform/soc@0/a8f8800.usb/power/runtime_status

After connecting a usb device, they will all become "active".

Thanks,
Mani

> Konrad
> > 
> > While enabling runtime PM, I noticed that the xhci driver suspends before
> > catching the xhci interrupts during resume. This ended up deferring the
> > device enumeration for some time. So I included a patch adding autosuspend
> > delay of 200ms to the xhci driver. With this delay, usb enumeration happens
> > properly.
> > 
> > This series has been tested on SC8280XP-CRD and RB5 devices.
> > 
> > Thanks,
> > Mani
> > 
> > Manivannan Sadhasivam (5):
> >   arm64: dts: qcom: sc8280xp: Add missing dwc3 quirks
> >   xhci: host: Use 200ms autosuspend delay for runtime suspend
> >   usb: dwc3: qcom: Fix null ptr access during runtime_suspend()
> >   usb: dwc3: qcom: Clear pending interrupt before enabling wake
> >     interrupt
> >   usb: dwc3: qcom: Allow runtime PM
> > 
> >  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++++++++++++
> >  drivers/usb/dwc3/dwc3-qcom.c           | 13 +++++++++----
> >  drivers/usb/host/xhci-plat.c           |  2 ++
> >  3 files changed, 25 insertions(+), 4 deletions(-)
> >
Konrad Dybcio March 27, 2023, 10:33 a.m. UTC | #3
On 27.03.2023 12:10, Manivannan Sadhasivam wrote:
> On Mon, Mar 27, 2023 at 11:24:58AM +0200, Konrad Dybcio wrote:
>>
>>
>> On 27.03.2023 11:17, Manivannan Sadhasivam wrote:
>>> On Mon, Mar 27, 2023 at 11:01:35AM +0200, Konrad Dybcio wrote:
>>>>
>>>>
>>>> On 25.03.2023 17:52, Manivannan Sadhasivam wrote:
>>>>> Hi,
>>>>>
>>>>> This series allows the dwc3-qcom driver to do runtime PM itself without
>>>>> userspace intervention. Still, userspace is required to enable runtime PM
>>>>> for dwc3 glue and xhci drivers as we cannot enable runtime PM for them.
>>>>> But this series avoids one more additional step.
>>>> What sort of 'userspace intervention' are we talking about?
>>>> echo mem > /sys/power/state?
>>>>
>>>
>>> I forgot to add that bit:
>>>
>>> echo auto > /sys/devices/platform/soc@0/a8f8800.usb/a800000.usb/xhci-hcd.1.auto/power/control
>>> echo auto > /sys/devices/platform/soc@0/a8f8800.usb/a800000.usb/power/control
>>>
>>> You need to set "auto" for the runtime control for both xhci and dwc drivers.
>>>
>>> Then if you don't connect a usb device, all 3 drivers (dwc3-qcom, dwc3, and
>>> xhci) will become runtime suspended after a delay of 5s (default delay).
>>>
>>> This can be confirmed by:
>>>
>>> cat /sys/devices/platform/soc@0/a8f8800.usb/power/runtime_status
>>>
>>> After connecting a usb device, they will all become "active".
>> Thanks! And if I'm following correctly, we can't enable runtime PM
>> for the DWC3 glue and XHCI drivers, as that would cause havoc on
>> other, non-qc platforms. Is that correct?
>>
> 
> Kind of. Actually dwc3 glue is our qcom driver, other one is just dwc3 driver.
> 
> The havoc would apply to xhci driver because, once it is suspended, one of its
> parent drivers has to resume it. And that requires runtime PM support for all
> the parent drivers which is currently not available.
Makes sense, thanks for the explanation!

> 
> But for dwc3 driver, I'm not sure about the consequence though. Maybe I should
> send it as a separate patch later on and see what other platforms folks think
> of it.
May be worth a shot!

Konrad

> 
> Thanks,
> Mani
> 
>> Konrad
>>>
>>> Thanks,
>>> Mani
>>>
>>>> Konrad
>>>>>
>>>>> While enabling runtime PM, I noticed that the xhci driver suspends before
>>>>> catching the xhci interrupts during resume. This ended up deferring the
>>>>> device enumeration for some time. So I included a patch adding autosuspend
>>>>> delay of 200ms to the xhci driver. With this delay, usb enumeration happens
>>>>> properly.
>>>>>
>>>>> This series has been tested on SC8280XP-CRD and RB5 devices.
>>>>>
>>>>> Thanks,
>>>>> Mani
>>>>>
>>>>> Manivannan Sadhasivam (5):
>>>>>   arm64: dts: qcom: sc8280xp: Add missing dwc3 quirks
>>>>>   xhci: host: Use 200ms autosuspend delay for runtime suspend
>>>>>   usb: dwc3: qcom: Fix null ptr access during runtime_suspend()
>>>>>   usb: dwc3: qcom: Clear pending interrupt before enabling wake
>>>>>     interrupt
>>>>>   usb: dwc3: qcom: Allow runtime PM
>>>>>
>>>>>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++++++++++++
>>>>>  drivers/usb/dwc3/dwc3-qcom.c           | 13 +++++++++----
>>>>>  drivers/usb/host/xhci-plat.c           |  2 ++
>>>>>  3 files changed, 25 insertions(+), 4 deletions(-)
>>>>>
>>>
>