@@ -607,11 +607,9 @@ &usb_sec_role_switch {
};
&usb_sec {
- status = "okay";
-};
-
-&usb_sec_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&wifi {
@@ -684,11 +684,9 @@ &usb_sec_role_switch {
};
&usb_sec {
- status = "okay";
-};
-
-&usb_sec_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&wifi {
@@ -2605,8 +2605,8 @@ usb_prim_role_switch: endpoint {
};
usb_sec: usb@a8f8800 {
- compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
- reg = <0 0x0a8f8800 0 0x400>;
+ compatible = "qcom,sc8180x-dwc3", "qcom,dwc3", "snps,dwc3";
+ reg = <0 0x0a800000 0 0x200000>;
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -2622,11 +2622,12 @@ usb_sec: usb@a8f8800 {
"xo";
resets = <&gcc GCC_USB30_SEC_BCR>;
power-domains = <&gcc USB30_SEC_GDSC>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ interrupt-names = "dwc_usb3", "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
@@ -2637,26 +2638,17 @@ usb_sec: usb@a8f8800 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- dma-ranges;
+ iommus = <&apps_smmu 0x160 0>;
- status = "disabled";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
- usb_sec_dwc3: usb@a800000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a800000 0 0xcd00>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x160 0>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
- phy-names = "usb2-phy", "usb3-phy";
+ status = "disabled";
- port {
- usb_sec_role_switch: endpoint {
- };
+ port {
+ usb_sec_role_switch: endpoint {
};
};
};
Flatten one of the USB controllers in the SC8180X platform, as an example. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> --- .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 6 ++-- arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 6 ++-- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 34 +++++++++------------- 3 files changed, 17 insertions(+), 29 deletions(-)