diff mbox series

[2/3] arm64: dts: meson: u200: enable i2c busses

Message ID 20190514101237.13969-3-jbrunet@baylibre.com
State Accepted
Commit 664065217d477135d3fdab43be68c6eabaa4d336
Headers show
Series [1/3] arm64: dts: meson: g12a: add i2c nodes | expand

Commit Message

Jerome Brunet May 14, 2019, 10:12 a.m. UTC 
Add the 3 i2c busses present on the u200 reference design.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

---
 .../boot/dts/amlogic/meson-g12a-u200.dts      | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

-- 
2.20.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 972926121beb..e02534ab7673 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -169,6 +169,27 @@ 
 	pinctrl-names = "default";
 };
 
+/* i2c Touch */
+&i2c0 {
+	status = "okay";
+	pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c CM */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c Audio */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
 /* SD card */
 &sd_emmc_b {
 	status = "okay";