diff mbox series

[net-next,5/6] net: ipa: introduce gsi_ring_setup()

Message ID 20210621175627.238474-6-elder@linaro.org
State New
Headers show
Series net: ipa: add support for IPA v3.1 | expand

Commit Message

Alex Elder June 21, 2021, 5:56 p.m. UTC
Prior to IPA v3.5.1, there is no HW_PARAM_2 GSI register, which we
use to determine the number of channels and endpoints per execution
environment.  In that case, we will just assume the number supported
is the maximum supported by the driver.

Introduce gsi_ring_setup() to encapsulate the code that determines
the number of channels and endpoints.

Update GSI_EVT_RING_COUNT_MAX so it is big enough to handle any
available channel for all supported hardware (IPA v4.9 can have 23
channels and 24 event rings).

Signed-off-by: Alex Elder <elder@linaro.org>
---
 drivers/net/ipa/gsi.c | 77 ++++++++++++++++++++++++++++---------------
 drivers/net/ipa/gsi.h |  2 +-
 2 files changed, 51 insertions(+), 28 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index efd826e508bce..427c68b2ad8f3 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -224,6 +224,51 @@  static void gsi_irq_setup(struct gsi *gsi)
 	iowrite32(0, gsi->virt + GSI_CNTXT_GSI_IRQ_EN_OFFSET);
 }
 
+/* Get # supported channel and event rings; there is no gsi_ring_teardown() */
+static int gsi_ring_setup(struct gsi *gsi)
+{
+	struct device *dev = gsi->dev;
+	u32 count;
+	u32 val;
+
+	if (gsi->version < IPA_VERSION_3_5_1) {
+		/* No HW_PARAM_2 register prior to IPA v3.5.1, assume the max */
+		gsi->channel_count = GSI_CHANNEL_COUNT_MAX;
+		gsi->evt_ring_count = GSI_EVT_RING_COUNT_MAX;
+
+		return 0;
+	}
+
+	val = ioread32(gsi->virt + GSI_GSI_HW_PARAM_2_OFFSET);
+
+	count = u32_get_bits(val, NUM_CH_PER_EE_FMASK);
+	if (!count) {
+		dev_err(dev, "GSI reports zero channels supported\n");
+		return -EINVAL;
+	}
+	if (count > GSI_CHANNEL_COUNT_MAX) {
+		dev_warn(dev, "limiting to %u channels; hardware supports %u\n",
+			 GSI_CHANNEL_COUNT_MAX, count);
+		count = GSI_CHANNEL_COUNT_MAX;
+	}
+	gsi->channel_count = count;
+
+	count = u32_get_bits(val, NUM_EV_PER_EE_FMASK);
+	if (!count) {
+		dev_err(dev, "GSI reports zero event rings supported\n");
+		return -EINVAL;
+	}
+	if (count > GSI_EVT_RING_COUNT_MAX) {
+		dev_warn(dev,
+			 "limiting to %u event rings; hardware supports %u\n",
+			 GSI_EVT_RING_COUNT_MAX, count);
+		count = GSI_EVT_RING_COUNT_MAX;
+	}
+	gsi->evt_ring_count = count;
+
+	return 0;
+}
+
 /* Event ring commands are performed one at a time.  Their completion
  * is signaled by the event ring control GSI interrupt type, which is
  * only enabled when we issue an event ring command.  Only the event
@@ -1834,43 +1879,21 @@  static void gsi_channel_teardown(struct gsi *gsi)
 /* Setup function for GSI.  GSI firmware must be loaded and initialized */
 int gsi_setup(struct gsi *gsi)
 {
-	struct device *dev = gsi->dev;
 	u32 val;
+	int ret;
 
 	/* Here is where we first touch the GSI hardware */
 	val = ioread32(gsi->virt + GSI_GSI_STATUS_OFFSET);
 	if (!(val & ENABLED_FMASK)) {
-		dev_err(dev, "GSI has not been enabled\n");
+		dev_err(gsi->dev, "GSI has not been enabled\n");
 		return -EIO;
 	}
 
 	gsi_irq_setup(gsi);		/* No matching teardown required */
 
-	val = ioread32(gsi->virt + GSI_GSI_HW_PARAM_2_OFFSET);
-
-	gsi->channel_count = u32_get_bits(val, NUM_CH_PER_EE_FMASK);
-	if (!gsi->channel_count) {
-		dev_err(dev, "GSI reports zero channels supported\n");
-		return -EINVAL;
-	}
-	if (gsi->channel_count > GSI_CHANNEL_COUNT_MAX) {
-		dev_warn(dev,
-			 "limiting to %u channels; hardware supports %u\n",
-			 GSI_CHANNEL_COUNT_MAX, gsi->channel_count);
-		gsi->channel_count = GSI_CHANNEL_COUNT_MAX;
-	}
-
-	gsi->evt_ring_count = u32_get_bits(val, NUM_EV_PER_EE_FMASK);
-	if (!gsi->evt_ring_count) {
-		dev_err(dev, "GSI reports zero event rings supported\n");
-		return -EINVAL;
-	}
-	if (gsi->evt_ring_count > GSI_EVT_RING_COUNT_MAX) {
-		dev_warn(dev,
-			 "limiting to %u event rings; hardware supports %u\n",
-			 GSI_EVT_RING_COUNT_MAX, gsi->evt_ring_count);
-		gsi->evt_ring_count = GSI_EVT_RING_COUNT_MAX;
-	}
+	ret = gsi_ring_setup(gsi);	/* No matching teardown required */
+	if (ret)
+		return ret;
 
 	/* Initialize the error log */
 	iowrite32(0, gsi->virt + GSI_ERROR_LOG_OFFSET);
diff --git a/drivers/net/ipa/gsi.h b/drivers/net/ipa/gsi.h
index d5996bdb20ef5..81cd7b07f6e14 100644
--- a/drivers/net/ipa/gsi.h
+++ b/drivers/net/ipa/gsi.h
@@ -17,7 +17,7 @@ 
 
 /* Maximum number of channels and event rings supported by the driver */
 #define GSI_CHANNEL_COUNT_MAX	23
-#define GSI_EVT_RING_COUNT_MAX	20
+#define GSI_EVT_RING_COUNT_MAX	24
 
 /* Maximum TLV FIFO size for a channel; 64 here is arbitrary (and high) */
 #define GSI_TLV_MAX		64