@@ -255,6 +255,8 @@ struct ems_usb {
unsigned int free_slots; /* remember number of available slots */
struct ems_cpc_msg active_params; /* active controller parameters */
+ void *rxbuf[MAX_RX_URBS];
+ dma_addr_t rxbuf_dma[MAX_RX_URBS];
};
static void ems_usb_read_interrupt_callback(struct urb *urb)
@@ -587,6 +589,7 @@ static int ems_usb_start(struct ems_usb *dev)
for (i = 0; i < MAX_RX_URBS; i++) {
struct urb *urb = NULL;
u8 *buf = NULL;
+ dma_addr_t buf_dma;
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -596,7 +599,7 @@ static int ems_usb_start(struct ems_usb *dev)
}
buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
- &urb->transfer_dma);
+ &buf_dma);
if (!buf) {
netdev_err(netdev, "No memory left for USB buffer\n");
usb_free_urb(urb);
@@ -604,6 +607,8 @@ static int ems_usb_start(struct ems_usb *dev)
break;
}
+ urb->transfer_dma = buf_dma;
+
usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
buf, RX_BUFFER_SIZE,
ems_usb_read_bulk_callback, dev);
@@ -619,6 +624,9 @@ static int ems_usb_start(struct ems_usb *dev)
break;
}
+ dev->rxbuf[i] = buf;
+ dev->rxbuf_dma[i] = buf_dma;
+
/* Drop reference, USB core will take care of freeing it */
usb_free_urb(urb);
}
@@ -684,6 +692,10 @@ static void unlink_all_urbs(struct ems_usb *dev)
usb_kill_anchored_urbs(&dev->rx_submitted);
+ for (i = 0; i < MAX_RX_URBS; ++i)
+ usb_free_coherent(dev->udev, RX_BUFFER_SIZE,
+ dev->rxbuf[i], dev->rxbuf_dma[i]);
+
usb_kill_anchored_urbs(&dev->tx_submitted);
atomic_set(&dev->active_tx_urbs, 0);
In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> --- drivers/net/can/usb/ems_usb.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)