diff mbox series

[33/72] softfloat: Use uadd64_carry, usub64_borrow in softfloat-macros.h

Message ID 20210508014802.892561-34-richard.henderson@linaro.org
State Superseded
Headers show
Series Convert floatx80 and float128 to FloatParts | expand

Commit Message

Richard Henderson May 8, 2021, 1:47 a.m. UTC
Use compiler support for carry arithmetic.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

---
 include/fpu/softfloat-macros.h | 95 +++++++++-------------------------
 1 file changed, 25 insertions(+), 70 deletions(-)

-- 
2.25.1

Comments

Alex Bennée May 13, 2021, 10 a.m. UTC | #1
Richard Henderson <richard.henderson@linaro.org> writes:

> Use compiler support for carry arithmetic.


Didn't we have a series that attempted to take advantage of compiler
support for Int128? Is the compiler end up smart enough to use 128 bit
wide ops if it can?

> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>


Anyway:

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>


-- 
Alex Bennée
Richard Henderson May 13, 2021, 12:38 p.m. UTC | #2
On 5/13/21 5:00 AM, Alex Bennée wrote:
> 

> Richard Henderson <richard.henderson@linaro.org> writes:

> 

>> Use compiler support for carry arithmetic.

> 

> Didn't we have a series that attempted to take advantage of compiler

> support for Int128? Is the compiler end up smart enough to use 128 bit

> wide ops if it can?


That was one of the iterations of this patch set, yes.  In the end it turned 
out to be easier to be able to address frac_hi and frac_lo directly.

It's likely that this choice would have been different if we didn't have to 
deal with 32-bit hosts and could rely on the compiler having the 128-bit type.


r~
diff mbox series

Patch

diff --git a/include/fpu/softfloat-macros.h b/include/fpu/softfloat-macros.h
index a35ec2893a..2e3760a9c1 100644
--- a/include/fpu/softfloat-macros.h
+++ b/include/fpu/softfloat-macros.h
@@ -83,6 +83,7 @@  this code that are retained.
 #define FPU_SOFTFLOAT_MACROS_H
 
 #include "fpu/softfloat-types.h"
+#include "qemu/host-utils.h"
 
 /*----------------------------------------------------------------------------
 | Shifts `a' right by the number of bits given in `count'.  If any nonzero
@@ -403,16 +404,12 @@  static inline void
 | are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
 *----------------------------------------------------------------------------*/
 
-static inline void
- add128(
-     uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1, uint64_t *z0Ptr, uint64_t *z1Ptr )
+static inline void add128(uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1,
+                          uint64_t *z0Ptr, uint64_t *z1Ptr)
 {
-    uint64_t z1;
-
-    z1 = a1 + b1;
-    *z1Ptr = z1;
-    *z0Ptr = a0 + b0 + ( z1 < a1 );
-
+    bool c = 0;
+    *z1Ptr = uadd64_carry(a1, b1, &c);
+    *z0Ptr = uadd64_carry(a0, b0, &c);
 }
 
 /*----------------------------------------------------------------------------
@@ -423,34 +420,14 @@  static inline void
 | `z1Ptr', and `z2Ptr'.
 *----------------------------------------------------------------------------*/
 
-static inline void
- add192(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t a2,
-     uint64_t b0,
-     uint64_t b1,
-     uint64_t b2,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr
- )
+static inline void add192(uint64_t a0, uint64_t a1, uint64_t a2,
+                          uint64_t b0, uint64_t b1, uint64_t b2,
+                          uint64_t *z0Ptr, uint64_t *z1Ptr, uint64_t *z2Ptr)
 {
-    uint64_t z0, z1, z2;
-    int8_t carry0, carry1;
-
-    z2 = a2 + b2;
-    carry1 = ( z2 < a2 );
-    z1 = a1 + b1;
-    carry0 = ( z1 < a1 );
-    z0 = a0 + b0;
-    z1 += carry1;
-    z0 += ( z1 < carry1 );
-    z0 += carry0;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
+    bool c = 0;
+    *z2Ptr = uadd64_carry(a2, b2, &c);
+    *z1Ptr = uadd64_carry(a1, b1, &c);
+    *z0Ptr = uadd64_carry(a0, b0, &c);
 }
 
 /*----------------------------------------------------------------------------
@@ -461,14 +438,12 @@  static inline void
 | `z1Ptr'.
 *----------------------------------------------------------------------------*/
 
-static inline void
- sub128(
-     uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1, uint64_t *z0Ptr, uint64_t *z1Ptr )
+static inline void sub128(uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1,
+                          uint64_t *z0Ptr, uint64_t *z1Ptr)
 {
-
-    *z1Ptr = a1 - b1;
-    *z0Ptr = a0 - b0 - ( a1 < b1 );
-
+    bool c = 0;
+    *z1Ptr = usub64_borrow(a1, b1, &c);
+    *z0Ptr = usub64_borrow(a0, b0, &c);
 }
 
 /*----------------------------------------------------------------------------
@@ -479,34 +454,14 @@  static inline void
 | pointed to by `z0Ptr', `z1Ptr', and `z2Ptr'.
 *----------------------------------------------------------------------------*/
 
-static inline void
- sub192(
-     uint64_t a0,
-     uint64_t a1,
-     uint64_t a2,
-     uint64_t b0,
-     uint64_t b1,
-     uint64_t b2,
-     uint64_t *z0Ptr,
-     uint64_t *z1Ptr,
-     uint64_t *z2Ptr
- )
+static inline void sub192(uint64_t a0, uint64_t a1, uint64_t a2,
+                          uint64_t b0, uint64_t b1, uint64_t b2,
+                          uint64_t *z0Ptr, uint64_t *z1Ptr, uint64_t *z2Ptr)
 {
-    uint64_t z0, z1, z2;
-    int8_t borrow0, borrow1;
-
-    z2 = a2 - b2;
-    borrow1 = ( a2 < b2 );
-    z1 = a1 - b1;
-    borrow0 = ( a1 < b1 );
-    z0 = a0 - b0;
-    z0 -= ( z1 < borrow1 );
-    z1 -= borrow1;
-    z0 -= borrow0;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
+    bool c = 0;
+    *z2Ptr = usub64_borrow(a2, b2, &c);
+    *z1Ptr = usub64_borrow(a1, b1, &c);
+    *z0Ptr = usub64_borrow(a0, b0, &c);
 }
 
 /*----------------------------------------------------------------------------