diff mbox series

[5.9,282/757] dmaengine: ti: k3-udma-glue: fix channel enable functions

Message ID 20201027135503.806351312@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Oct. 27, 2020, 1:48 p.m. UTC 
From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 52c74d3d356b60f3c53dc69e5109752347e144e8 ]

Now the K3 UDMA glue layer enable functions perform RMW operation on UDMA
RX/TX RT_CTL registers to set EN bit and enable channel, which is
incorrect, because only EN bit has to be set in those registers to enable
channel (all other bits should be cleared 0).
More over, this causes issues when bootloader leaves UDMA channel RX/TX
RT_CTL registers in incorrect state - TDOWN bit set, for example. As
result, UDMA channel will just perform teardown right after it's enabled.

Hence, fix it by writing correct values (EN=1) directly in UDMA channel
RX/TX RT_CTL registers in k3_udma_glue_enable_tx/rx_chn() functions.

Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200916120955.7963-1-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/k3-udma-glue.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index 3a5d33ea5ebe7..42c8ad10d75eb 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -378,17 +378,11 @@  EXPORT_SYMBOL_GPL(k3_udma_glue_pop_tx_chn);
 
 int k3_udma_glue_enable_tx_chn(struct k3_udma_glue_tx_channel *tx_chn)
 {
-	u32 txrt_ctl;
-
-	txrt_ctl = UDMA_PEER_RT_EN_ENABLE;
 	xudma_tchanrt_write(tx_chn->udma_tchanx, UDMA_CHAN_RT_PEER_RT_EN_REG,
-			    txrt_ctl);
+			    UDMA_PEER_RT_EN_ENABLE);
 
-	txrt_ctl = xudma_tchanrt_read(tx_chn->udma_tchanx,
-				      UDMA_CHAN_RT_CTL_REG);
-	txrt_ctl |= UDMA_CHAN_RT_CTL_EN;
 	xudma_tchanrt_write(tx_chn->udma_tchanx, UDMA_CHAN_RT_CTL_REG,
-			    txrt_ctl);
+			    UDMA_CHAN_RT_CTL_EN);
 
 	k3_udma_glue_dump_tx_rt_chn(tx_chn, "txchn en");
 	return 0;
@@ -1058,19 +1052,14 @@  EXPORT_SYMBOL_GPL(k3_udma_glue_rx_flow_disable);
 
 int k3_udma_glue_enable_rx_chn(struct k3_udma_glue_rx_channel *rx_chn)
 {
-	u32 rxrt_ctl;
-
 	if (rx_chn->remote)
 		return -EINVAL;
 
 	if (rx_chn->flows_ready < rx_chn->flow_num)
 		return -EINVAL;
 
-	rxrt_ctl = xudma_rchanrt_read(rx_chn->udma_rchanx,
-				      UDMA_CHAN_RT_CTL_REG);
-	rxrt_ctl |= UDMA_CHAN_RT_CTL_EN;
 	xudma_rchanrt_write(rx_chn->udma_rchanx, UDMA_CHAN_RT_CTL_REG,
-			    rxrt_ctl);
+			    UDMA_CHAN_RT_CTL_EN);
 
 	xudma_rchanrt_write(rx_chn->udma_rchanx, UDMA_CHAN_RT_PEER_RT_EN_REG,
 			    UDMA_PEER_RT_EN_ENABLE);