diff mbox series

[5.9,594/757] arm64: dts: qcom: sm8150: fix up primary USB nodes

Message ID 20201027135518.398183118@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Oct. 27, 2020, 1:54 p.m. UTC
From: Jonathan Marek <jonathan@marek.ca>

[ Upstream commit 79493db5bb573017767b4f48b0fc69bfd01b82d2 ]

The compatible for hsphy has out of place indentation, and the assigned
clock rate for GCC_USB30_PRIM_MASTER_CLK is incorrect, the clock doesn't
support a rate of 150000000. Use a rate of 200000000 to match downstream.

Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200818160445.14008-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index b86a7ead30067..ab8680c6672e4 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -767,7 +767,7 @@  glink-edge {
 
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sm8150-usb-hs-phy",
-							"qcom,usb-snps-hs-7nm-phy";
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0 0x088e2000 0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -833,7 +833,7 @@  usb_1: usb@a6f8800 {
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <150000000>;
+			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,