diff mbox

dt-bindings: Document the hi3660 reset bindings

Message ID 1481249504-7942-1-git-send-email-zhangfei.gao@linaro.org
State Accepted
Commit 836e235495838760f1b8458f462c76404fb7b140
Headers show

Commit Message

Zhangfei Gao Dec. 9, 2016, 2:11 a.m. UTC
Add DT bindings documentation for hi3660 SoC reset controller.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>

---
 .../bindings/reset/hisilicon,hi3660-reset.txt      | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Rob Herring (Arm) Dec. 12, 2016, 5:20 p.m. UTC | #1
On Fri, Dec 09, 2016 at 10:11:44AM +0800, Zhangfei Gao wrote:
> Add DT bindings documentation for hi3660 SoC reset controller.

> 

> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>

> ---

>  .../bindings/reset/hisilicon,hi3660-reset.txt      | 43 ++++++++++++++++++++++

>  1 file changed, 43 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt


Acked-by: Rob Herring <robh@kernel.org>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Zhangfei Gao Dec. 13, 2016, 1:53 a.m. UTC | #2
On 2016年12月13日 01:20, Rob Herring wrote:
> On Fri, Dec 09, 2016 at 10:11:44AM +0800, Zhangfei Gao wrote:

>> Add DT bindings documentation for hi3660 SoC reset controller.

>>

>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>

>> ---

>>   .../bindings/reset/hisilicon,hi3660-reset.txt      | 43 ++++++++++++++++++++++

>>   1 file changed, 43 insertions(+)

>>   create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt

> Acked-by: Rob Herring <robh@kernel.org>

Thanks Rob.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
new file mode 100644
index 0000000..2bf3344
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt
@@ -0,0 +1,43 @@ 
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller registers are part of the system-ctl block on
+hi3660 SoC.
+
+Required properties:
+- compatible: should be
+		 "hisilicon,hi3660-reset"
+- hisi,rst-syscon: phandle of the reset's syscon.
+- #reset-cells : Specifies the number of cells needed to encode a
+  reset source.  The type shall be a <u32> and the value shall be 2.
+
+	 Cell #1 : offset of the reset assert control
+	           register from the syscon register base
+		   offset + 4: deassert control register
+		   offset + 8: status control register
+	 Cell #2 : bit position of the reset in the reset control register
+
+Example:
+	iomcu: iomcu@ffd7e000 {
+		compatible = "hisilicon,hi3660-iomcu", "syscon";
+		reg = <0x0 0xffd7e000 0x0 0x1000>;
+	};
+
+	iomcu_rst: iomcu_rst_controller {
+		compatible = "hisilicon,hi3660-reset";
+		hisi,rst-syscon = <&iomcu>;
+		#reset-cells = <2>;
+	};
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+        i2c0: i2c@..... {
+                ...
+		resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */
+                ...
+        };