diff mbox series

[2/4,v7] drm/bridge: Provide a way to embed timing info in bridges

Message ID 20180112074854.9560-2-linus.walleij@linaro.org
State Accepted
Commit 36a776df6e088a0cec2303aacd2fe762830b2457
Headers show
Series None | expand

Commit Message

Linus Walleij Jan. 12, 2018, 7:48 a.m. UTC
After some discussion and failed patch sets trying to convey
the right timing information between the display engine and
a bridge using the connector, I try instead to use an optional
timing information container in the bridge itself, so that
display engines can retrieve it from any bridge and use it to
determine how to drive outputs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v6->v7:
- Fix the comment style to use the new inline type of kerneldoc
  for struct members.
- Need an explicit ACK/review by someone on this patch to continue
  with the series...
ChangeLog v5->v6:
- Sort forward struct declarations alphabetically
- Switch to using DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE to indicate
  positive or negatice clock samling edge
ChangeLog ->v5:
- New patch
---
 include/drm/drm_bridge.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Archit Taneja Jan. 12, 2018, 9:24 a.m. UTC | #1
On 01/12/2018 01:18 PM, Linus Walleij wrote:
> After some discussion and failed patch sets trying to convey
> the right timing information between the display engine and
> a bridge using the connector, I try instead to use an optional
> timing information container in the bridge itself, so that
> display engines can retrieve it from any bridge and use it to
> determine how to drive outputs.

queued to drm-misc-next after fixing a minor checkpatch warning
regarding a line exceeding 80 characters.

Thanks,
Archit

> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v6->v7:
> - Fix the comment style to use the new inline type of kerneldoc
>    for struct members.
> - Need an explicit ACK/review by someone on this patch to continue
>    with the series...
> ChangeLog v5->v6:
> - Sort forward struct declarations alphabetically
> - Switch to using DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE to indicate
>    positive or negatice clock samling edge
> ChangeLog ->v5:
> - New patch
> ---
>   include/drm/drm_bridge.h | 33 +++++++++++++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
> 
> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> index 682d01ba920c..d3c2eea0bb63 100644
> --- a/include/drm/drm_bridge.h
> +++ b/include/drm/drm_bridge.h
> @@ -29,6 +29,7 @@
>   #include <drm/drm_modes.h>
>   
>   struct drm_bridge;
> +struct drm_bridge_timings;
>   struct drm_panel;
>   
>   /**
> @@ -222,6 +223,35 @@ struct drm_bridge_funcs {
>   	void (*enable)(struct drm_bridge *bridge);
>   };
>   
> +/**
> + * struct drm_bridge_timings - timing information for the bridge
> + */
> +struct drm_bridge_timings {
> +	/**
> +	 * @sampling_edge:
> +	 *
> +	 * Tells whether the bridge samples the digital input signal
> +	 * from the display engine on the positive or negative edge of the clock,
> +	 * this should reuse the DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE bitwise
> +	 * flags from the DRM connector (bit 2 and 3 valid).
> +	 */
> +	u32 sampling_edge;
> +	/**
> +	 * @setup_time_ps:
> +	 *
> +	 * Defines the time in picoseconds the input data lines must be
> +	 * stable before the clock edge.
> +	 */
> +	u32 setup_time_ps;
> +	/**
> +	 * @hold_time_ps:
> +	 *
> +	 * Defines the time in picoseconds taken for the bridge to sample the
> +	 * input signal after the clock edge.
> +	 */
> +	u32 hold_time_ps;
> +};
> +
>   /**
>    * struct drm_bridge - central DRM bridge control structure
>    * @dev: DRM device this bridge belongs to
> @@ -229,6 +259,8 @@ struct drm_bridge_funcs {
>    * @next: the next bridge in the encoder chain
>    * @of_node: device node pointer to the bridge
>    * @list: to keep track of all added bridges
> + * @timings: the timing specification for the bridge, if any (may
> + * be NULL)
>    * @funcs: control functions
>    * @driver_private: pointer to the bridge driver's internal context
>    */
> @@ -240,6 +272,7 @@ struct drm_bridge {
>   	struct device_node *of_node;
>   #endif
>   	struct list_head list;
> +	const struct drm_bridge_timings *timings;
>   
>   	const struct drm_bridge_funcs *funcs;
>   	void *driver_private;
>
Laurent Pinchart Jan. 12, 2018, 10:41 p.m. UTC | #2
Hi Linus,

Thank you for the patch.

On Friday, 12 January 2018 09:48:52 EET Linus Walleij wrote:
> After some discussion and failed patch sets trying to convey
> the right timing information between the display engine and
> a bridge using the connector, I try instead to use an optional
> timing information container in the bridge itself, so that
> display engines can retrieve it from any bridge and use it to
> determine how to drive outputs.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> ChangeLog v6->v7:
> - Fix the comment style to use the new inline type of kerneldoc
>   for struct members.
> - Need an explicit ACK/review by someone on this patch to continue
>   with the series...
> ChangeLog v5->v6:
> - Sort forward struct declarations alphabetically
> - Switch to using DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE to indicate
>   positive or negatice clock samling edge
> ChangeLog ->v5:
> - New patch
> ---
>  include/drm/drm_bridge.h | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> index 682d01ba920c..d3c2eea0bb63 100644
> --- a/include/drm/drm_bridge.h
> +++ b/include/drm/drm_bridge.h
> @@ -29,6 +29,7 @@
>  #include <drm/drm_modes.h>
> 
>  struct drm_bridge;
> +struct drm_bridge_timings;
>  struct drm_panel;
> 
>  /**
> @@ -222,6 +223,35 @@ struct drm_bridge_funcs {
>  	void (*enable)(struct drm_bridge *bridge);
>  };
> 
> +/**
> + * struct drm_bridge_timings - timing information for the bridge
> + */
> +struct drm_bridge_timings {
> +	/**
> +	 * @sampling_edge:
> +	 *
> +	 * Tells whether the bridge samples the digital input signal
> +	 * from the display engine on the positive or negative edge of the clock,
> +	 * this should reuse the DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE bitwise
> +	 * flags from the DRM connector (bit 2 and 3 valid).
> +	 */
> +	u32 sampling_edge;
> +	/**
> +	 * @setup_time_ps:
> +	 *
> +	 * Defines the time in picoseconds the input data lines must be
> +	 * stable before the clock edge.
> +	 */
> +	u32 setup_time_ps;
> +	/**
> +	 * @hold_time_ps:
> +	 *
> +	 * Defines the time in picoseconds taken for the bridge to sample the
> +	 * input signal after the clock edge.
> +	 */
> +	u32 hold_time_ps;
> +};
> +
>  /**
>   * struct drm_bridge - central DRM bridge control structure
>   * @dev: DRM device this bridge belongs to
> @@ -229,6 +259,8 @@ struct drm_bridge_funcs {
>   * @next: the next bridge in the encoder chain
>   * @of_node: device node pointer to the bridge
>   * @list: to keep track of all added bridges
> + * @timings: the timing specification for the bridge, if any (may
> + * be NULL)
>   * @funcs: control functions
>   * @driver_private: pointer to the bridge driver's internal context
>   */
> @@ -240,6 +272,7 @@ struct drm_bridge {
>  	struct device_node *of_node;
>  #endif
>  	struct list_head list;
> +	const struct drm_bridge_timings *timings;
> 
>  	const struct drm_bridge_funcs *funcs;
>  	void *driver_private;
diff mbox series

Patch

diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 682d01ba920c..d3c2eea0bb63 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -29,6 +29,7 @@ 
 #include <drm/drm_modes.h>
 
 struct drm_bridge;
+struct drm_bridge_timings;
 struct drm_panel;
 
 /**
@@ -222,6 +223,35 @@  struct drm_bridge_funcs {
 	void (*enable)(struct drm_bridge *bridge);
 };
 
+/**
+ * struct drm_bridge_timings - timing information for the bridge
+ */
+struct drm_bridge_timings {
+	/**
+	 * @sampling_edge:
+	 *
+	 * Tells whether the bridge samples the digital input signal
+	 * from the display engine on the positive or negative edge of the clock,
+	 * this should reuse the DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE bitwise
+	 * flags from the DRM connector (bit 2 and 3 valid).
+	 */
+	u32 sampling_edge;
+	/**
+	 * @setup_time_ps:
+	 *
+	 * Defines the time in picoseconds the input data lines must be
+	 * stable before the clock edge.
+	 */
+	u32 setup_time_ps;
+	/**
+	 * @hold_time_ps:
+	 *
+	 * Defines the time in picoseconds taken for the bridge to sample the
+	 * input signal after the clock edge.
+	 */
+	u32 hold_time_ps;
+};
+
 /**
  * struct drm_bridge - central DRM bridge control structure
  * @dev: DRM device this bridge belongs to
@@ -229,6 +259,8 @@  struct drm_bridge_funcs {
  * @next: the next bridge in the encoder chain
  * @of_node: device node pointer to the bridge
  * @list: to keep track of all added bridges
+ * @timings: the timing specification for the bridge, if any (may
+ * be NULL)
  * @funcs: control functions
  * @driver_private: pointer to the bridge driver's internal context
  */
@@ -240,6 +272,7 @@  struct drm_bridge {
 	struct device_node *of_node;
 #endif
 	struct list_head list;
+	const struct drm_bridge_timings *timings;
 
 	const struct drm_bridge_funcs *funcs;
 	void *driver_private;