| Message ID | 20200427151107.101075-2-giulio.benetti@benettiengineering.com |
|---|---|
| State | New |
| Headers | show |
| Series | Various i.MXRT bug/typo fixes | expand |
Hi Giulio, On Mon, Apr 27, 2020 at 12:11 PM Giulio Benetti <giulio.benetti at benettiengineering.com> wrote: > > Make "of=" the same for the 2 commands since we're writing to the same > sd-card. > > Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com> > --- > board/freescale/imxrt1050-evk/README | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README > index f7e2894025..55b6a0877a 100644 > --- a/board/freescale/imxrt1050-evk/README > +++ b/board/freescale/imxrt1050-evk/README > @@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the u-boot.img. > > - Flash the SPL image into the micro SD card: > > -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync > +sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync I usually prefer to write /dev/sdX instead because someone may follow the instructions as is and inadvertently kill their hard disk or another device that may appear at /dev/sdb.
On 4/27/20 5:34 PM, Fabio Estevam wrote: > Hi Giulio, > > On Mon, Apr 27, 2020 at 12:11 PM Giulio Benetti > <giulio.benetti at benettiengineering.com> wrote: >> >> Make "of=" the same for the 2 commands since we're writing to the same >> sd-card. >> >> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com> >> --- >> board/freescale/imxrt1050-evk/README | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README >> index f7e2894025..55b6a0877a 100644 >> --- a/board/freescale/imxrt1050-evk/README >> +++ b/board/freescale/imxrt1050-evk/README >> @@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the u-boot.img. >> >> - Flash the SPL image into the micro SD card: >> >> -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync >> +sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync > > I usually prefer to write /dev/sdX instead because someone may follow > the instructions as is and inadvertently kill their hard disk or > another device that may appear at /dev/sdb. Oh, that's right. I send V3 with that corrected. Thank you
diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README index f7e2894025..55b6a0877a 100644 --- a/board/freescale/imxrt1050-evk/README +++ b/board/freescale/imxrt1050-evk/README @@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync - Flash the u-boot.img image into the micro SD card:
Make "of=" the same for the 2 commands since we're writing to the same sd-card. Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com> --- board/freescale/imxrt1050-evk/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)