Message ID | 1705669223-5655-5-git-send-email-quic_msarkar@quicinc.com |
---|---|
State | New |
Headers | show |
Series | Add Change to integrate HDMA with dwc ep driver | expand |
Hi Mrinmay On Fri, Jan 19, 2024 at 06:30:20PM +0530, Mrinmay Sarkar wrote: > From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > To maintain uniformity with eDMA, let's move the HDMA max channel > definition to edma.h. While at it, let's also rename it to HDMA_MAX_NR_CH. First of all include/linux/dma/edma.h already contains the common DW EDMA and _HDMA_ settings/entities including the number of channels. Both of these IP-cores have the same constraints on the max amount of channels. Moreover the EDMA_MAX_WR_CH/EDMA_MAX_RD_CH macros are already utilized in the common dw_edma_probe() method. So to speak you can freely use these macros for HDMA too. Thus this change is redundant. So is the patches 1/6 and 2/6. Note currently all the common DW EDMA driver code uses the EDMA_/edma_ prefixes. HDMA_/hdma_ prefixes are utilized in the Native HDMA-specific module only. So if you wished to provide some IP-core specific settings utilized in the common part of the driver, then the best approach would be to provide a change for the entire driver interface (for instance first convert it to having a neutral prefixes, like xdma_/etc, and then use the IP-core specific ones). So please just use the EDMA_MAX_WR_CH and EDMA_MAX_RD_CH macros and drop the patches 1, 2, and 4. -Serge(y) > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> > --- > drivers/dma/dw-edma/dw-hdma-v0-core.c | 4 ++-- > drivers/dma/dw-edma/dw-hdma-v0-regs.h | 3 +-- > include/linux/dma/edma.h | 1 + > 3 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c > index 1f4cb7d..819ef1f 100644 > --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c > +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c > @@ -54,7 +54,7 @@ static void dw_hdma_v0_core_off(struct dw_edma *dw) > { > int id; > > - for (id = 0; id < HDMA_V0_MAX_NR_CH; id++) { > + for (id = 0; id < HDMA_MAX_NR_CH; id++) { > SET_BOTH_CH_32(dw, id, int_setup, > HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK); > SET_BOTH_CH_32(dw, id, int_clear, > @@ -70,7 +70,7 @@ static u16 dw_hdma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir) > * available, we set it to maximum channels and let the platform > * set the right number of channels. > */ > - return HDMA_V0_MAX_NR_CH; > + return HDMA_MAX_NR_CH; > } > > static enum dma_status dw_hdma_v0_core_ch_status(struct dw_edma_chan *chan) > diff --git a/drivers/dma/dw-edma/dw-hdma-v0-regs.h b/drivers/dma/dw-edma/dw-hdma-v0-regs.h > index a974abd..cd7eab2 100644 > --- a/drivers/dma/dw-edma/dw-hdma-v0-regs.h > +++ b/drivers/dma/dw-edma/dw-hdma-v0-regs.h > @@ -11,7 +11,6 @@ > > #include <linux/dmaengine.h> > > -#define HDMA_V0_MAX_NR_CH 8 > #define HDMA_V0_LOCAL_ABORT_INT_EN BIT(6) > #define HDMA_V0_REMOTE_ABORT_INT_EN BIT(5) > #define HDMA_V0_LOCAL_STOP_INT_EN BIT(4) > @@ -92,7 +91,7 @@ struct dw_hdma_v0_ch { > } __packed; > > struct dw_hdma_v0_regs { > - struct dw_hdma_v0_ch ch[HDMA_V0_MAX_NR_CH]; /* 0x0000..0x0fa8 */ > + struct dw_hdma_v0_ch ch[HDMA_MAX_NR_CH]; /* 0x0000..0x0fa8 */ > } __packed; > > struct dw_hdma_v0_lli { > diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h > index 550f6a4..2cdf249a 100644 > --- a/include/linux/dma/edma.h > +++ b/include/linux/dma/edma.h > @@ -14,6 +14,7 @@ > > #define EDMA_MAX_WR_CH 8 > #define EDMA_MAX_RD_CH 8 > +#define HDMA_MAX_NR_CH 8 > > struct dw_edma; > struct dw_edma_chip; > -- > 2.7.4 >
diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c index 1f4cb7d..819ef1f 100644 --- a/drivers/dma/dw-edma/dw-hdma-v0-core.c +++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c @@ -54,7 +54,7 @@ static void dw_hdma_v0_core_off(struct dw_edma *dw) { int id; - for (id = 0; id < HDMA_V0_MAX_NR_CH; id++) { + for (id = 0; id < HDMA_MAX_NR_CH; id++) { SET_BOTH_CH_32(dw, id, int_setup, HDMA_V0_STOP_INT_MASK | HDMA_V0_ABORT_INT_MASK); SET_BOTH_CH_32(dw, id, int_clear, @@ -70,7 +70,7 @@ static u16 dw_hdma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir) * available, we set it to maximum channels and let the platform * set the right number of channels. */ - return HDMA_V0_MAX_NR_CH; + return HDMA_MAX_NR_CH; } static enum dma_status dw_hdma_v0_core_ch_status(struct dw_edma_chan *chan) diff --git a/drivers/dma/dw-edma/dw-hdma-v0-regs.h b/drivers/dma/dw-edma/dw-hdma-v0-regs.h index a974abd..cd7eab2 100644 --- a/drivers/dma/dw-edma/dw-hdma-v0-regs.h +++ b/drivers/dma/dw-edma/dw-hdma-v0-regs.h @@ -11,7 +11,6 @@ #include <linux/dmaengine.h> -#define HDMA_V0_MAX_NR_CH 8 #define HDMA_V0_LOCAL_ABORT_INT_EN BIT(6) #define HDMA_V0_REMOTE_ABORT_INT_EN BIT(5) #define HDMA_V0_LOCAL_STOP_INT_EN BIT(4) @@ -92,7 +91,7 @@ struct dw_hdma_v0_ch { } __packed; struct dw_hdma_v0_regs { - struct dw_hdma_v0_ch ch[HDMA_V0_MAX_NR_CH]; /* 0x0000..0x0fa8 */ + struct dw_hdma_v0_ch ch[HDMA_MAX_NR_CH]; /* 0x0000..0x0fa8 */ } __packed; struct dw_hdma_v0_lli { diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h index 550f6a4..2cdf249a 100644 --- a/include/linux/dma/edma.h +++ b/include/linux/dma/edma.h @@ -14,6 +14,7 @@ #define EDMA_MAX_WR_CH 8 #define EDMA_MAX_RD_CH 8 +#define HDMA_MAX_NR_CH 8 struct dw_edma; struct dw_edma_chip;