Patch Metrics

Linaro contributions to linux-i2c.

Patches per month: Submitted Accepted

Project Details

List addresslinux-i2c@vger.kernel.org
Source treegit://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging.git
Last commit scannedce397d215ccd07b8ae3f71db689aedb85d56ab40
Show patches with: State = Action Required       |   195 patches
« 1 2 »
Patch Series S/W/F Date Submitter Delegate State
[v3,2/2] i2c: Add Qualcomm CCI I2C driver Untitled series #13777 0 0 0 2018-08-06 Vinod New
[v8,2/6] arm64: dts: actions: Add pinctrl definition for S900 I2C controller Untitled series #13697 0 0 0 2018-08-01 Manivannan Sadhasivam New
[v7,4/6] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board Untitled series #13562 0 0 0 2018-07-26 Manivannan Sadhasivam New
[v6,6/6] MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver Add Actions Semiconductor Owl S900 I2C support 0 0 0 2018-07-23 Manivannan Sadhasivam New
[v2,1/2] dt-bindings: i2c: Add binding document for Qualcomm CCI i2c: Add support for Qualcomm Camera Control Interface 0 0 0 2018-07-17 Vinod New
[v3,5/6] i2c: Add Actions Semiconductor Owl family S900 I2C driver [v3,1/6] dt-bindings: i2c: Add binding for Actions Semiconductor Owl I2C controller 0 0 0 2018-06-30 Manivannan Sadhasivam New
[v3,1/6] dt-bindings: i2c: Add binding for Actions Semiconductor Owl I2C controller [v3,1/6] dt-bindings: i2c: Add binding for Actions Semiconductor Owl I2C controller 0 0 0 2018-06-30 Manivannan Sadhasivam New
[2/5] arm64: dts: actions: Add Actions Semi S900 I2C controller nodes Untitled series #12522 0 0 0 2018-06-23 Manivannan Sadhasivam New
i2c: mux: pca954x: Use helper variable in probe i2c: mux: pca954x: Use helper variable in probe 0 0 0 2018-06-05 Linus Walleij New
i2c: i801: mark PM functions as __maybe_unused i2c: i801: mark PM functions as __maybe_unused 0 0 0 2018-05-25 Arnd Bergmann New
[v7,4/4] MAINTAINERS: add Ard as Socionext SynQuacer I2C driver maintainer add support for Socionext SynQuacer I2C controller 0 0 0 2018-04-03 Ard Biesheuvel New
i2c: algo-bit: Move debug variable i2c: algo-bit: Move debug variable 0 0 0 2018-02-16 Linus Walleij New
[v2] i2c: acorn: add MODULE_LICENSE tag [v2] i2c: acorn: add MODULE_LICENSE tag 0 0 0 2018-01-15 Arnd Bergmann New
i2c: Include GPIO consumer header in main include i2c: Include GPIO consumer header in main include 0 0 0 2017-12-08 Linus Walleij New
i2c: core: Use GPIO descriptors for recovery i2c: core: Use GPIO descriptors for recovery 0 0 0 2017-12-08 Linus Walleij New
[v2] ARM: sa1100: simpad: Correct I2C GPIO offsets [v2] ARM: sa1100: simpad: Correct I2C GPIO offsets 0 0 0 2017-11-07 Linus Walleij New
i2c: meson: use generic compatible i2c: meson: use generic compatible 0 0 0 2017-10-13 Jerome Brunet New
i2c: aspeed: Deassert reset in probe i2c: aspeed: Deassert reset in probe 0 0 0 2017-10-10 Joel Stanley New
i2c: zx2967: drop COMPILE_TEST dependency 0 0 0 2017-06-24 Shawn Guo New
[v2,2/2] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family Add I2C driver for ZTE ZX2967 family SoCs 0 0 0 2017-06-22 Shawn Guo New
[v2,1/2] dt: bindings: add documentation for zx2967 family i2c controller Add I2C driver for ZTE ZX2967 family SoCs 0 0 0 2017-06-22 Shawn Guo New
[2/2] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family Add I2C driver for ZTE ZX2967 family SoCs 0 0 0 2017-05-28 Shawn Guo New
[1/2] ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller [1/2] ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller 0 0 0 2017-04-22 Hanjun Guo New
[v6,3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family Untitled series #436 0 0 0 2017-02-09 Baoyou Xie New
[v3,3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family [v3,1/3] dt: bindings: add documentation for zx2967 family i2c controller 0 0 0 2017-01-26 Baoyou Xie New
i2c: Fix error print when address is invalid 0 0 0 2017-01-24 Stephen Boyd New
[v3,resend] i2c: designware: add reset interface 0 0 0 2016-12-27 Zhangfei Gao New
misc: eeprom: implement compatible DT probing 0 0 0 2016-12-08 Linus Walleij New
i2c: designware: add reset interface 0 0 0 2016-11-22 Zhangfei Gao New
[2/2] i2c: octeon: Fix waiting for operation completion 0 0 0 2016-11-11 Jan Glauber New
[PATCHv7,05/11] i2c: Export i2c_match_id() for direct use by device drivers 0 0 0 2016-11-07 Kieran Bingham New
[PATCHv7,01/11] i2c: Add pointer dereference protection to i2c_match_id() 0 0 0 2016-11-07 Kieran Bingham New
[v15,6/7] base: soc: introduce soc_device_match() interface Untitled series #1789 0 0 0 2016-10-28 Y.b. Lu New
i2c: hix5hd2: allow build with ARCH_HISI 0 0 0 2016-10-24 Ruqiang Ju New
i2c: uniphier[-f]: fix bool logic calculation 0 0 0 2016-10-19 Masahiro Yamada New
[v2] i2c: uniphier-f: fix misdetection of incomplete STOP condition 0 0 0 2016-09-23 Masahiro Yamada New
[v2,4/4] gpio: pca953x: fix an incorrect lockdep warning 0 0 0 2016-09-16 Bartosz Golaszewski New
[v2,1/4] i2c: export i2c_adapter_depth() 0 0 0 2016-09-16 Bartosz Golaszewski New
gpio: pca953x: fix an incorrect lockdep warning 0 0 0 2016-09-16 Bartosz Golaszewski New
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended 0 0 0 2016-08-25 Sudeep Holla New
[v2] eeprom: at24: check if the chip is functional in probe() 0 0 0 2016-08-12 Bartosz Golaszewski New
[2/2] i2c-dev: Don't block the adapter from unregistering 0 0 0 2016-07-06 Viresh Kumar New
[09/10] i2c: designware-platdrv: Simplify code by using dev_get_drvdata() 0 0 0 2016-06-14 Ulf Hansson New
[08/10] i2c: designware-platdrv: Check return value from clk_prepare_enable() 0 0 0 2016-06-14 Ulf Hansson New
[07/10] i2c: designware-platdrv: Re-init the HW when resuming 0 0 0 2016-06-14 Ulf Hansson New
[06/10] i2c: designware-platdrv: Update runtime PM last busy mark in ->probe() 0 0 0 2016-06-14 Ulf Hansson New
[05/10] i2c: designware-platdrv: Fix clk gating in ->remove() 0 0 0 2016-06-14 Ulf Hansson New
[04/10] i2c: designware-platdrv: Disable autosuspend in error path in ->probe() 0 0 0 2016-06-14 Ulf Hansson New
[03/10] i2c: designware-platdrv: Unconditionally enable runtime PM 0 0 0 2016-06-14 Ulf Hansson New
[02/10] i2c: designware-platdrv: Gate clk in error path in ->probe() 0 0 0 2016-06-14 Ulf Hansson New
[01/10] i2c: designware-platdrv: Return error in ->probe() when clk ungate fails 0 0 0 2016-06-14 Ulf Hansson New
[RESEND,13/14] eeprom: at24: add support for at24mac series 0 0 0 2016-06-06 Bartosz Golaszewski New
[RESEND,10/14] eeprom: at24: support reading the serial number 0 0 0 2016-06-06 Bartosz Golaszewski New
[RESEND,02/14] eeprom: at24: move at24_read() below at24_eeprom_write() 0 0 0 2016-06-06 Bartosz Golaszewski New
[2/4] soc: fsl: add GUTS driver for QorIQ platforms Untitled series #1977 0 0 0 2016-05-30 Arnd Bergmann New
[v2,07/10] i2c-i801: Fix some inconsistent variable names 0 0 0 2016-05-30 Corey Minyard New
[v2,04/10] i2c-i801: Consolidate calls to i801_check_pre() 0 0 0 2016-05-30 Corey Minyard New
[v2,03/10] i2c-i801: Move hwpec handling into block transaction 0 0 0 2016-05-30 Corey Minyard New
[v2,02/10] i2c-i801: Move hostcfg set/reset to i801_access() 0 0 0 2016-05-30 Corey Minyard New
[09/14] eeprom: at24: platform_data: add serial number flag 0 0 0 2016-05-29 Bartosz Golaszewski New
i2c: nomadik: move runtime suspend of hw to _noirq 0 0 0 2016-05-23 Linus Walleij New
[v2,3/3] ipmi: Handle I2C parms in the SSIF driver. 0 0 0 2016-05-10 Corey Minyard New
[v2,2/3] i2c-smbus: Allow parms to be passed in from sysfs new_device 0 0 0 2016-05-10 Corey Minyard New
[v2,1/3] i2c: Add parameters to sysfs-added i2c devices 0 0 0 2016-05-10 Corey Minyard New
[10/12] nvmem: lpc18xx-eeprom: remove nvmem regmap dependency 0 0 0 2016-04-24 Srinivas Kandagatla New
[02/12] eeprom: at24: remove nvmem regmap dependency 0 0 0 2016-04-24 Srinivas Kandagatla New
i2c: st: Implement i2c_bus_recovery_info callbacks 0 0 0 2016-04-12 Peter Griffin New
[RESEND,v2,05/13] eeprom: at24: replace msleep() with usleep_range() 0 0 0 2016-04-11 Bartosz Golaszewski New
[RESEND,v2,01/13] eeprom: at24: remove a reduntant if 0 0 0 2016-04-11 Bartosz Golaszewski New
i2c: let I2C masters ignore their children for PM 0 0 0 2016-04-11 Linus Walleij New
[v2,13/13] eeprom: at24: add at24mac chips to the list of supported devices 0 0 0 2016-03-24 Bartosz Golaszewski New
[v2,12/13] eeprom: at24: add support for at24mac series 0 0 0 2016-03-24 Bartosz Golaszewski New
[v2,10/13] eeprom: at24: add the at24cs series to the list of supported devices 0 0 0 2016-03-24 Bartosz Golaszewski New
[v2,09/13] eeprom: at24: use at24cs_serial_read() 0 0 0 2016-03-24 Bartosz Golaszewski New
[v2,08/13] eeprom: at24: call read and write routines via function pointers 0 0 0 2016-03-24 Bartosz Golaszewski New
[v2,07/13] eeprom: at24: support reading of the serial number 0 0 0 2016-03-24 Bartosz Golaszewski New
[v2,04/13] eeprom: at24: make locking more fine-grained 0 0 0 2016-03-24 Bartosz Golaszewski New
[11/13] eeprom: at24: add at24mac series flag 0 0 0 2016-03-24 Bartosz Golaszewski New
[5/5] i2c-i801: Remove redundant code and event-drive 0 0 0 2016-01-19 Corey Minyard New
[4/5] i2c-i801: clean up block transaction 0 0 0 2016-01-19 Corey Minyard New
[3/5] i2c-i801: Move PEC handling into i2c_block_transaction() 0 0 0 2016-01-19 Corey Minyard New
[2/5] i2c-i801: Move hostcfg set/reset to i801_access() 0 0 0 2016-01-19 Corey Minyard New
[1/5] i2c-i801: hwpec and check_pre cleanups 0 0 0 2016-01-19 Corey Minyard New
i2c-smbus: Don't report duplicate alerts 0 0 0 2016-01-19 Corey Minyard New
[v4] i2c: designware: Do not require clock when SSCN and FFCN are provided 0 0 0 2016-01-04 Suravee Suthikulpanit New
[v2] i2c: designware: Do not require clock when SSCN and FFCN are provided 0 0 0 2015-12-17 Suravee Suthikulpanit New
i2c: designware: Do not require clock when SSCN and FFCN are provided 0 0 0 2015-12-15 Suravee Suthikulpanit New
[RESEND,v2,3/9] eeprom: at24: tie up an additional address for at24cs series 0 0 0 2015-12-02 Bartosz Golaszewski New
[v4] arm64: dts: add all hi6220 i2c nodes 0 0 0 2015-12-02 Xinwei Kong New
[v2,7/9] eeprom: at24: add the at24cs series to the list of supported devices 0 0 0 2015-10-27 Bartosz Golaszewski New
[v2,2/9] eeprom: at24: new flag in platform_data 0 0 0 2015-10-27 Bartosz Golaszewski New
[RESEND,9/9] eeprom: at24: readability tweaks 0 0 0 2015-10-20 Bartosz Golaszewski New
[RESEND,5/9] eeprom: at24: export the serial number through sysfs 0 0 0 2015-10-20 Bartosz Golaszewski New
[RESEND,4/9] eeprom: at24: support reading of the serial number 0 0 0 2015-10-20 Bartosz Golaszewski New
[9/9] eeprom: at24: readability tweaks 0 0 0 2015-10-12 Bartosz Golaszewski New
[5/9] eeprom: at24: export the serial number through sysfs 0 0 0 2015-10-12 Bartosz Golaszewski New
[4/9] eeprom: at24: support reading of the serial number 0 0 0 2015-10-12 Bartosz Golaszewski New
[RESEND,v4,8/8] mfd: as3722: Rid driver of superfluous I2C device ID structure 0 0 0 2015-09-11 Kieran Bingham New
[RESEND,v4,7/8] mfd: 88pm860x: Move over to new I2C device .probe() call 0 0 0 2015-09-11 Kieran Bingham New
[RESEND,v4,6/8] i2c: Provide a temporary .probe2() call-back type 0 0 0 2015-09-11 Kieran Bingham New
« 1 2 »