diff mbox series

[v2,2/9] media: ov2740: Add support for external clock

Message ID 20231126141517.7534-3-hdegoede@redhat.com
State New
Headers show
Series media: ov2740: reset GPIO, clk and 180 MHz link-frequency support | expand

Commit Message

Hans de Goede Nov. 26, 2023, 2:15 p.m. UTC
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.

On other ACPI platforms, such as e.g. various ThinkPad models with
IPU6 + ov2740 sensor, the sensor driver must control the reset GPIO
and the sensor's clock itself.

Add support for having the driver control an optional clock.

Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Wrap long dev_err_probe() line
---
 drivers/media/i2c/ov2740.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index e5f9569a229d..0396e40419ca 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -3,6 +3,7 @@ 
 
 #include <asm/unaligned.h>
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
@@ -336,6 +337,7 @@  struct ov2740 {
 
 	/* GPIOs, clocks */
 	struct gpio_desc *reset_gpio;
+	struct clk *clk;
 
 	/* Current mode */
 	const struct ov2740_mode *cur_mode;
@@ -1068,6 +1070,7 @@  static int ov2740_suspend(struct device *dev)
 	struct ov2740 *ov2740 = to_ov2740(sd);
 
 	gpiod_set_value_cansleep(ov2740->reset_gpio, 1);
+	clk_disable_unprepare(ov2740->clk);
 	return 0;
 }
 
@@ -1075,6 +1078,11 @@  static int ov2740_resume(struct device *dev)
 {
 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
 	struct ov2740 *ov2740 = to_ov2740(sd);
+	int ret;
+
+	ret = clk_prepare_enable(ov2740->clk);
+	if (ret)
+		return ret;
 
 	gpiod_set_value_cansleep(ov2740->reset_gpio, 0);
 	msleep(20);
@@ -1102,6 +1110,11 @@  static int ov2740_probe(struct i2c_client *client)
 		return dev_err_probe(dev, PTR_ERR(ov2740->reset_gpio),
 				     "failed to get reset GPIO\n");
 
+	ov2740->clk = devm_clk_get_optional(dev, "clk");
+	if (IS_ERR(ov2740->clk))
+		return dev_err_probe(dev, PTR_ERR(ov2740->clk),
+				     "failed to get clock\n");
+
 	v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops);
 	full_power = acpi_dev_state_d0(&client->dev);
 	if (full_power) {