diff mbox series

[v2,3/9] media: ov2740: Move fwnode_graph_get_next_endpoint() call up

Message ID 20231126141517.7534-4-hdegoede@redhat.com
State New
Headers show
Series media: ov2740: reset GPIO, clk and 180 MHz link-frequency support | expand

Commit Message

Hans de Goede Nov. 26, 2023, 2:15 p.m. UTC 
If the bridge has not yet setup the fwnode-graph then
the fwnode_property_read_u32("clock-frequency") call will fail.

Move the fwnode_graph_get_next_endpoint() call to above reading
the clock-frequency.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/media/i2c/ov2740.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index 0396e40419ca..832f24721dca 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -926,6 +926,14 @@  static int ov2740_check_hwcfg(struct device *dev)
 	int ret;
 	unsigned int i, j;
 
+	/*
+	 * Sometimes the fwnode graph is initialized by the bridge driver,
+	 * wait for this.
+	 */
+	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
+	if (!ep)
+		return -EPROBE_DEFER;
+
 	ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
 	if (ret)
 		return ret;
@@ -935,10 +943,6 @@  static int ov2740_check_hwcfg(struct device *dev)
 				     "external clock %d is not supported\n",
 				     mclk);
 
-	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
-	if (!ep)
-		return -EPROBE_DEFER;
-
 	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
 	fwnode_handle_put(ep);
 	if (ret)