diff mbox

[1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet

Message ID 1395414570-25515-2-git-send-email-zhangfei.gao@linaro.org
State Changes Requested
Headers show

Commit Message

Zhangfei Gao March 21, 2014, 3:09 p.m. UTC
This patch adds the Device Tree bindings for the Hisilicon hip04
Ethernet controller, including 100M / 1000M controller.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
 .../bindings/net/hisilicon-hip04-net.txt           |  107 ++++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt

Comments

Florian Fainelli March 21, 2014, 4:42 p.m. UTC | #1
2014-03-21 8:09 GMT-07:00 Zhangfei Gao <zhangfei.gao@linaro.org>:
> This patch adds the Device Tree bindings for the Hisilicon hip04
> Ethernet controller, including 100M / 1000M controller.
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
>  .../bindings/net/hisilicon-hip04-net.txt           |  107 ++++++++++++++++++++
>  1 file changed, 107 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
>
> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
> new file mode 100644
> index 0000000..22838b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
> @@ -0,0 +1,107 @@
> +Hisilicon hip04 Ethernet Controller
> +
> +* Ethernet controller node
> +
> +Required properties:
> +- compatible: should be "hisilicon,hip04-mac".
> +- reg: address and length of the register set for the device.
> +- interrupts: interrupt for the device.
> +- port-handle: phandle, specifies a reference to a node representing
> +  the connected port
> +- Inherets from ethernet common binding [1]
> +[1] Documentation/devicetree/bindings/net/ethernet.txt
> +
> +
> +* Ethernet ppe node:
> +Control rx & tx fifos of all ethernet controllers.
> +Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
> +Each controller's start recv channel is alisa_id * RX_DESC_NUM.
> +
> +Required properties:
> +- #address-cells : Should be <1>
> +- #size-cells : Should be <0>
> +- compatible: "hisilicon,hip04-ppe"
> +- reg: address and length of the register set for the device.
> +
> +==Child node==
> +
> +Required properties:
> +- reg: port physical number, range from 0 to 0x1f
> +
> +
> +* MDIO bus node:
> +
> +Required properties:
> +
> +- compatible: should be "hisilicon,hip04-mdio", "ethernet-phy-ieee802.3-c22".
> +- Inherets from MDIO bus node binding [2]
> +[2] Documentation/devicetree/bindings/net/phy.txt
> +
> +Example:
> +       aliases {
> +               ethernet0 = &fe;
> +               ethernet1 = &ge0;
> +               ethernet2 = &ge8;
> +       };
> +
> +       mdio {
> +               compatible = "hisilicon,hip04-mdio", "ethernet-phy-ieee802.3-c22";

That part is not quite correct, the compatible string should only be
"hisilicon,hip04-mdio", the other compatible string is for the child
Ethernet nodes below:

> +               reg = <0x28f1000 0x1000>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               phy0: ethernet-phy@0 {

This is where you need:

                            compatible = "ethernet-phy-ieee802.3-c22";

> +                       reg = <0>;
> +                       marvell,reg-init = <18 0x14 0 0x8001>;
> +               };
> +
> +               phy1: ethernet-phy@1 {
> +                       reg = <1>;
> +                       marvell,reg-init = <18 0x14 0 0x8001>;
> +               };
> +       };
> +
> +       ppe: ppe@28c0000 {
> +               compatible = "hisilicon,hip04-ppe";
> +               reg = <0x28c0000 0x10000>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               eth0_port: port@1f {
> +                       reg = <0x1f>;
> +               };
> +
> +               eth1_port: port@0 {
> +                       reg = <0>;
> +               };
> +
> +               eth2_port: port@8 {
> +                       reg = <8>;
> +               };
> +       };
> +
> +       fe: ethernet@28b0000 {
> +               compatible = "hisilicon,hip04-mac";
> +               reg = <0x28b0000 0x10000>;
> +               interrupts = <0 413 4>;
> +               phy-mode = "mii";
> +               port-handle = <&eth0_port>;
> +       };
> +
> +       ge0: ethernet@2800000 {
> +               compatible = "hisilicon,hip04-mac";
> +               reg = <0x2800000 0x10000>;
> +               interrupts = <0 402 4>;
> +               phy-mode = "sgmii";
> +               port-handle = <&eth1_port>;
> +               phy-handle = <&phy0>;
> +       };
> +
> +       ge8: ethernet@2880000 {
> +               compatible = "hisilicon,hip04-mac";
> +               reg = <0x2880000 0x10000>;
> +               interrupts = <0 410 4>;
> +               phy-mode = "sgmii";
> +               port-handle = <&eth2_port>;
> +               phy-handle = <&phy1>;
> +       };
> --
> 1.7.9.5
>
Sergei Shtylyov March 21, 2014, 6:22 p.m. UTC | #2
Hello.

On 03/21/2014 06:09 PM, Zhangfei Gao wrote:

> This patch adds the Device Tree bindings for the Hisilicon hip04
> Ethernet controller, including 100M / 1000M controller.

> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
>   .../bindings/net/hisilicon-hip04-net.txt           |  107 ++++++++++++++++++++
>   1 file changed, 107 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt

> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
> new file mode 100644
> index 0000000..22838b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
> @@ -0,0 +1,107 @@
> +Hisilicon hip04 Ethernet Controller
> +
> +* Ethernet controller node
> +
> +Required properties:
> +- compatible: should be "hisilicon,hip04-mac".
> +- reg: address and length of the register set for the device.
> +- interrupts: interrupt for the device.
> +- port-handle: phandle, specifies a reference to a node representing
> +  the connected port
> +- Inherets from ethernet common binding [1]

    Inherits.

> +[1] Documentation/devicetree/bindings/net/ethernet.txt

    Well, this way it's not clear what exactly it iherits as that file 
describes many alternate properties with the same meaning.

> +
> +
> +* Ethernet ppe node:
> +Control rx & tx fifos of all ethernet controllers.
> +Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
> +Each controller's start recv channel is alisa_id * RX_DESC_NUM.
> +
> +Required properties:
> +- #address-cells : Should be <1>
> +- #size-cells : Should be <0>
> +- compatible: "hisilicon,hip04-ppe"
> +- reg: address and length of the register set for the device.
> +
> +==Child node==
> +
> +Required properties:
> +- reg: port physical number, range from 0 to 0x1f
> +
> +
> +* MDIO bus node:
> +
> +Required properties:
> +
> +- compatible: should be "hisilicon,hip04-mdio", "ethernet-phy-ieee802.3-c22".

    I didn't understand what kind of node this is: MDIO bus or PHY? These 
values seem mutually exclusive.

> +- Inherets from MDIO bus node binding [2]

    Inherits.

> +[2] Documentation/devicetree/bindings/net/phy.txt

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
new file mode 100644
index 0000000..22838b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
@@ -0,0 +1,107 @@ 
+Hisilicon hip04 Ethernet Controller
+
+* Ethernet controller node
+
+Required properties:
+- compatible: should be "hisilicon,hip04-mac".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device.
+- port-handle: phandle, specifies a reference to a node representing
+  the connected port
+- Inherets from ethernet common binding [1]
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+
+
+* Ethernet ppe node:
+Control rx & tx fifos of all ethernet controllers.
+Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
+Each controller's start recv channel is alisa_id * RX_DESC_NUM.
+
+Required properties:
+- #address-cells : Should be <1>
+- #size-cells : Should be <0>
+- compatible: "hisilicon,hip04-ppe"
+- reg: address and length of the register set for the device.
+
+==Child node==
+
+Required properties:
+- reg: port physical number, range from 0 to 0x1f
+
+
+* MDIO bus node:
+
+Required properties:
+
+- compatible: should be "hisilicon,hip04-mdio", "ethernet-phy-ieee802.3-c22".
+- Inherets from MDIO bus node binding [2]
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+	aliases {
+		ethernet0 = &fe;
+		ethernet1 = &ge0;
+		ethernet2 = &ge8;
+	};
+
+	mdio {
+		compatible = "hisilicon,hip04-mdio", "ethernet-phy-ieee802.3-c22";
+		reg = <0x28f1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			marvell,reg-init = <18 0x14 0 0x8001>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			marvell,reg-init = <18 0x14 0 0x8001>;
+		};
+	};
+
+	ppe: ppe@28c0000 {
+		compatible = "hisilicon,hip04-ppe";
+		reg = <0x28c0000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth0_port: port@1f {
+			reg = <0x1f>;
+		};
+
+		eth1_port: port@0 {
+			reg = <0>;
+		};
+
+		eth2_port: port@8 {
+			reg = <8>;
+		};
+	};
+
+	fe: ethernet@28b0000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x28b0000 0x10000>;
+		interrupts = <0 413 4>;
+		phy-mode = "mii";
+		port-handle = <&eth0_port>;
+	};
+
+	ge0: ethernet@2800000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x2800000 0x10000>;
+		interrupts = <0 402 4>;
+		phy-mode = "sgmii";
+		port-handle = <&eth1_port>;
+		phy-handle = <&phy0>;
+	};
+
+	ge8: ethernet@2880000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x2880000 0x10000>;
+		interrupts = <0 410 4>;
+		phy-mode = "sgmii";
+		port-handle = <&eth2_port>;
+		phy-handle = <&phy1>;
+	};