diff mbox series

[v2,03/11] pinctrl: renesas: rzg2l: Move arg and index in the main function block

Message ID 20231207070700.4156557-4-claudiu.beznea.uj@bp.renesas.com
State New
Headers show
Series renesas: rzg3s: Add support for Ethernet | expand

Commit Message

Claudiu Dec. 7, 2023, 7:06 a.m. UTC
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Move arg and index in the main block of the function as they are used by
more than one case block of switch-case (3 out of 4 for arg, 2 out of 4
for index). In this way some lines of code are removed.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v2:
- adapted for index variable and updated patch title and description
  accordingly

 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

Comments

Geert Uytterhoeven Dec. 13, 2023, 1:31 p.m. UTC | #1
On Thu, Dec 7, 2023 at 8:08 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Move arg and index in the main block of the function as they are used by
> more than one case block of switch-case (3 out of 4 for arg, 2 out of 4
> for index). In this way some lines of code are removed.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v2:
> - adapted for index variable and updated patch title and description
>   accordingly

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-pinctrl-for-v6.8.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index f01aa51b00c4..2eb240b731d5 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -842,7 +842,7 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 	struct rzg2l_pinctrl_pin_settings settings = pctrl->settings[_pin];
 	unsigned int *pin_data = pin->drv_data;
 	enum pin_config_param param;
-	unsigned int i;
+	unsigned int i, arg, index;
 	u32 cfg, off;
 	int ret;
 	u8 bit;
@@ -864,24 +864,21 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 	for (i = 0; i < num_configs; i++) {
 		param = pinconf_to_config_param(_configs[i]);
 		switch (param) {
-		case PIN_CONFIG_INPUT_ENABLE: {
-			unsigned int arg =
-					pinconf_to_config_argument(_configs[i]);
+		case PIN_CONFIG_INPUT_ENABLE:
+			arg = pinconf_to_config_argument(_configs[i]);
 
 			if (!(cfg & PIN_CFG_IEN))
 				return -EINVAL;
 
 			rzg2l_rmw_pin_config(pctrl, IEN(off), bit, IEN_MASK, !!arg);
 			break;
-		}
 
 		case PIN_CONFIG_POWER_SOURCE:
 			settings.power_source = pinconf_to_config_argument(_configs[i]);
 			break;
 
-		case PIN_CONFIG_DRIVE_STRENGTH: {
-			unsigned int arg = pinconf_to_config_argument(_configs[i]);
-			unsigned int index;
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			arg = pinconf_to_config_argument(_configs[i]);
 
 			if (!(cfg & PIN_CFG_IOLH_A) || hwcfg->drive_strength_ua)
 				return -EINVAL;
@@ -896,7 +893,6 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
 			break;
-		}
 
 		case PIN_CONFIG_DRIVE_STRENGTH_UA:
 			if (!(cfg & (PIN_CFG_IOLH_A | PIN_CFG_IOLH_B | PIN_CFG_IOLH_C)) ||
@@ -906,9 +902,8 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			settings.drive_strength_ua = pinconf_to_config_argument(_configs[i]);
 			break;
 
-		case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS: {
-			unsigned int arg = pinconf_to_config_argument(_configs[i]);
-			unsigned int index;
+		case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS:
+			arg = pinconf_to_config_argument(_configs[i]);
 
 			if (!(cfg & PIN_CFG_IOLH_B) || !hwcfg->iolh_groupb_oi[0])
 				return -EINVAL;
@@ -922,7 +917,6 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
 			break;
-		}
 
 		default:
 			return -EOPNOTSUPP;