diff mbox series

[5.9,009/757] net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()

Message ID 20201027135450.964834393@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH Oct. 27, 2020, 1:44 p.m. UTC 
From: Marek Vasut <marex@denx.de>

[ Upstream commit 64a632da538a6827fad0ea461925cedb9899ebe2 ]

The phy_reset_after_clk_enable() is always called with ndev->phydev,
however that pointer may be NULL even though the PHY device instance
already exists and is sufficient to perform the PHY reset.

This condition happens in fec_open(), where the clock must be enabled
first, then the PHY must be reset, and then the PHY IDs can be read
out of the PHY.

If the PHY still is not bound to the MAC, but there is OF PHY node
and a matching PHY device instance already, use the OF PHY node to
obtain the PHY device instance, and then use that PHY device instance
when triggering the PHY reset.

Fixes: 1b0a83ac04e3 ("net: fec: add phy_reset_after_clk_enable() support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Richard Leitner <richard.leitner@skidata.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/fec_main.c |   25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)
diff mbox series

Patch

--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1912,6 +1912,27 @@  out:
 	return ret;
 }
 
+static void fec_enet_phy_reset_after_clk_enable(struct net_device *ndev)
+{
+	struct fec_enet_private *fep = netdev_priv(ndev);
+	struct phy_device *phy_dev = ndev->phydev;
+
+	if (phy_dev) {
+		phy_reset_after_clk_enable(phy_dev);
+	} else if (fep->phy_node) {
+		/*
+		 * If the PHY still is not bound to the MAC, but there is
+		 * OF PHY node and a matching PHY device instance already,
+		 * use the OF PHY node to obtain the PHY device instance,
+		 * and then use that PHY device instance when triggering
+		 * the PHY reset.
+		 */
+		phy_dev = of_phy_find_device(fep->phy_node);
+		phy_reset_after_clk_enable(phy_dev);
+		put_device(&phy_dev->mdio.dev);
+	}
+}
+
 static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
@@ -1938,7 +1959,7 @@  static int fec_enet_clk_enable(struct ne
 		if (ret)
 			goto failed_clk_ref;
 
-		phy_reset_after_clk_enable(ndev->phydev);
+		fec_enet_phy_reset_after_clk_enable(ndev);
 	} else {
 		clk_disable_unprepare(fep->clk_enet_out);
 		if (fep->clk_ptp) {
@@ -2993,7 +3014,7 @@  fec_enet_open(struct net_device *ndev)
 	 * phy_reset_after_clk_enable() before because the PHY wasn't probed.
 	 */
 	if (reset_again)
-		phy_reset_after_clk_enable(ndev->phydev);
+		fec_enet_phy_reset_after_clk_enable(ndev);
 
 	if (fep->quirks & FEC_QUIRK_ERR006687)
 		imx6q_cpuidle_fec_irqs_used();