Show patches with: Archived = No       |   21066 patches
« 1 2 ... 206 207 208 … 210 211 »
Patch Series S/W/F Date Submitter Delegate State
[4/9,V2] EXYNOS: Add I2S registers --- 2012-08-22 Rajeshwari Shinde Superseded
[3/9,V2] Sound: Add command for audio playback --- 2012-08-22 Rajeshwari Shinde New
[2/9,V2] SOUND: Add WM8994 codec --- 2012-08-22 Rajeshwari Shinde New
[1/9,V2] SOUND: Add I2S driver --- 2012-08-22 Rajeshwari Shinde New
[9/9] EXYNOS5: Enable Sound --- 2012-08-14 Rajeshwari Shinde New
[8/9] EXYNOS: Add clock for I2S --- 2012-08-14 Rajeshwari Shinde New
[7/9] EXYNOS: Add I2S base address --- 2012-08-14 Rajeshwari Shinde New
[6/9] EXYNOS: Add pinmux for I2S --- 2012-08-14 Rajeshwari Shinde New
[5/9] EXYNOS: Add parameters required by I2S --- 2012-08-14 Rajeshwari Shinde New
[4/9] EXYNOS: Add I2S registers --- 2012-08-14 Rajeshwari Shinde Superseded
[3/9] Sound: Add command for audio playback --- 2012-08-14 Rajeshwari Shinde New
[2/9] SOUND: Add WM8994 codec --- 2012-08-14 Rajeshwari Shinde New
[1/9] SOUND: Add I2S driver --- 2012-08-14 Rajeshwari Shinde New
[4/4] EXYNOS: Update pinmux to use gpio numbering --- 2012-08-06 Rajeshwari Shinde New
[3/4] EXYNOS5: Enable GPIO Numbering. --- 2012-08-06 Rajeshwari Shinde New
[2/4] S5P: GPIO: Add GPIO pin numbering to driver --- 2012-08-06 Rajeshwari Shinde New
[1/4] EXYNOS5: Add GPIO unique pin numbering support --- 2012-08-06 Rajeshwari Shinde New
[7/7] EXYNOS5: Enable SPI booting. --- 2012-08-02 Rajeshwari Shinde New
[6/7,V4] EXYNOS5: Enable SPI --- 2012-08-02 Rajeshwari Shinde New
[5/7,V4] SPI: Add SPI Driver for EXYNOS. --- 2012-08-02 Rajeshwari Shinde New
[4/7,V4] EXYNOS5: Add base address for SPI. --- 2012-08-02 Rajeshwari Shinde New
[3/7,V4] EXYNOS: Add clock for SPI. --- 2012-08-02 Rajeshwari Shinde New
[2/7,V4] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-08-02 Rajeshwari Shinde New
[1/7,V4] EXYNOS5: Add pinmux support for SPI --- 2012-08-02 Rajeshwari Shinde New
[7/7,V3] Enable SPI booting. --- 2012-08-01 Rajeshwari Shinde New
[6/7,V3] EXYNOS5: Enable SPI --- 2012-08-01 Rajeshwari Shinde New
[5/7,V3] SPI: Add SPI Driver for EXYNOS. --- 2012-08-01 Rajeshwari Shinde New
[4/7,V3] EXYNOS5: Add base address for SPI. --- 2012-08-01 Rajeshwari Shinde New
[3/7,V3] EXYNOS: Add clock for SPI. --- 2012-08-01 Rajeshwari Shinde New
[2/7,V3] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-08-01 Rajeshwari Shinde New
[1/7,V3] EXYNOS5: Add pinmux support for SPI --- 2012-08-01 Rajeshwari Shinde New
[8/8,V2] EXYNOS5: Enable SPI booting. --- 2012-07-31 Rajeshwari Shinde New
[7/8,V2] EXYNOS5: Enable SPI --- 2012-07-31 Rajeshwari Shinde New
[6/8,V2] SPI: Add SPI Driver for EXYNOS. --- 2012-07-31 Rajeshwari Shinde New
[5/8] SPI: Add SPI slave mode flag --- 2012-07-31 Rajeshwari Shinde New
[4/8,V2] EXYNOS5: Add base address for SPI. --- 2012-07-31 Rajeshwari Shinde New
[3/8,V2] EXYNOS: Add clock for SPI. --- 2012-07-31 Rajeshwari Shinde New
[2/8,V2] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-07-31 Rajeshwari Shinde New
[1/8,V2] EXYNOS5: Add pinmux support for SPI --- 2012-07-31 Rajeshwari Shinde New
[8/8] EXYNOS5: Enable SPI booting. --- 2012-07-31 Rajeshwari Shinde New
[7/8] EXYNOS5: Enable SPI --- 2012-07-31 Rajeshwari Shinde New
[6/8] SPI: Add SPI Driver for EXYNOS. --- 2012-07-31 Rajeshwari Shinde New
[5/8] SPI: Add SPI slave mode flag --- 2012-07-31 Rajeshwari Shinde New
[4/8] EXYNOS5: Add base address for SPI. --- 2012-07-31 Rajeshwari Shinde New
[3/8] EXYNOS: Add clock for SPI. --- 2012-07-31 Rajeshwari Shinde New
[2/8] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-07-31 Rajeshwari Shinde New
[1/8] EXYNOS5: Add pinmux support for SPI --- 2012-07-31 Rajeshwari Shinde New
[8/8,V7] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-07-24 Rajeshwari Shinde Accepted
[7/8,V7] I2C: Add support for Multi channel --- 2012-07-24 Rajeshwari Shinde Accepted
[6/8,V7] I2C: Modify the I2C driver for EXYNOS5 --- 2012-07-24 Rajeshwari Shinde Accepted
[5/8,V7] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-07-24 Rajeshwari Shinde Accepted
[4/8,V7] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-07-24 Rajeshwari Shinde Accepted
[3/8,V7] EXYNOS5: define EXYNOS5_I2C_SPACING --- 2012-07-24 Rajeshwari Shinde Accepted
[2/8,V7] EXYNOS: Add I2C base address. --- 2012-07-24 Rajeshwari Shinde Accepted
[1/8,V7] EXYNOS: CLK: Add i2c clock --- 2012-07-24 Rajeshwari Shinde Accepted
[8/8,V6] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-07-19 Rajeshwari Shinde New
[7/8,V6] I2C: Add support for Multi channel --- 2012-07-19 Rajeshwari Shinde New
[6/8,V6] I2C: Modify the I2C driver for EXYNOS5 --- 2012-07-19 Rajeshwari Shinde New
[5/8,V6] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-07-19 Rajeshwari Shinde Superseded
[4/8,V6] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-07-19 Rajeshwari Shinde Superseded
[3/8,V6] EXYNOS5: define EXYNOS5_I2C_SPACING --- 2012-07-19 Rajeshwari Shinde Superseded
[2/8,V6] EXYNOS: Add I2C base address. --- 2012-07-19 Rajeshwari Shinde Superseded
[1/8,V6] EXYNOS: CLK: Add i2c clock --- 2012-07-19 Rajeshwari Shinde Superseded
EXYNOS: Fix USB compiler warning --- 2012-07-10 Rajeshwari Shinde Accepted
[7/7,V5] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-07-05 Rajeshwari Shinde New
[6/7,V5] I2C: Add support for Multi channel --- 2012-07-05 Rajeshwari Shinde New
[5/7,V5] I2C: Modify the I2C driver for EXYNOS5 --- 2012-07-05 Rajeshwari Shinde New
[4/7,V5] I2C: Move struct s3c24x0_i2c to a common place. --- 2012-07-05 Rajeshwari Shinde Superseded
[3/7,V5] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-07-05 Rajeshwari Shinde Superseded
[2/7,V5] EXYNOS: Add I2C base address. --- 2012-07-05 Rajeshwari Shinde New
[1/7,V5] EXYNOS: CLK: Add i2c clock --- 2012-07-05 Rajeshwari Shinde New
[10/10,V6] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-07-04 Rajeshwari Shinde Accepted
[09/10,V6] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-07-04 Rajeshwari Shinde Accepted
[08/10,V6] EXYNOS5: CLOCK: Add BPLL support --- 2012-07-04 Rajeshwari Shinde Accepted
[07/10,V6] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-07-04 Rajeshwari Shinde Accepted
[06/10,V6] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-07-04 Rajeshwari Shinde Accepted
[05/10,V6] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-07-04 Rajeshwari Shinde Accepted
[04/10,V6] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-07-04 Rajeshwari Shinde Accepted
[03/10,V6] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-07-04 Rajeshwari Shinde Accepted
[02/10,V6] SMDK5250: SPL: Define parametric board initializer --- 2012-07-04 Rajeshwari Shinde Accepted
[01/10,V6] ARCH: SPL: Add parametric board initializer --- 2012-07-04 Rajeshwari Shinde Accepted
[10/10,V5] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde Superseded
[09/10,V5] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde Superseded
[08/10,V5] EXYNOS5: CLOCK: Add BPLL support --- 2012-07-02 Rajeshwari Shinde Superseded
[07/10,V5] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde Superseded
[06/10,V5] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde New
[05/10,V5] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde New
[04/10,V5] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde Superseded
[03/10,V5] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-07-02 Rajeshwari Shinde Superseded
[02/10,V5] SMDK5250: SPL: Define parametric board initializer --- 2012-07-02 Rajeshwari Shinde Superseded
[01/10,V5] ARCH: SPL: Add parametric board initializer --- 2012-07-02 Rajeshwari Shinde Superseded
[10/10,V4] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[09/10,V4] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[08/10,V4] EXYNOS5: CLOCK: Add BPLL support --- 2012-06-29 Rajeshwari Shinde New
[07/10,V4] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[06/10,V4] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[05/10,V4] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[04/10,V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde Superseded
[03/10,V4] SMDK5250: Add smdk5250-uboot-spl.lds --- 2012-06-29 Rajeshwari Shinde Superseded
[02/10,V4] SMDK5250: SPL: Define parametric board initializer --- 2012-06-29 Rajeshwari Shinde Superseded
« 1 2 ... 206 207 208 … 210 211 »